Matrox MXO2 Quick Installation Guide

Matrox Video Products Group

Description

Matrox MXO2 Quick Installation Guide

Informations

• Publié par: ofesotan
• Nombre de lectures: 50
• Langue: Français
• Poids de l'ouvrage: 1 Mo

Extrait

M

a

Q

u

i

t

c

r

k

o

x



M

X

O

Installation Gui

2

de

March 14, 2009

v Y11078-101-0130

Trademarks Matrox Electronic Systems Ltd. ...........................................................................Matrox ® , MXO ™ Apple Inc.............................................................................................................Apple ® , Final Cut Pro ® , Mac ® , MacBook ® PCI-SIG ...............................................................................................................PCI-SIG ® , PCIe ® Personal Computer Memory Card International Association (PCMCIA) ..................PCMCIA ™ , ExpressCard ®

All other nationally and internationally recognized trademarks and tradenames are hereby acknowledged.

Copyright © 2009 Matrox Electronic Systems Ltd.  All rights reserved. Disclaimer Matrox Electronic Systems Ltd. reserves the right to make changes in specifications at any time and without notice. The information provided by this document is believed to be accurate and reliable. However, no responsibility is assumed by Matrox Electronic Systems Ltd. for its use; nor for any infringements of patents or other rights of third parties resulting from its use. No lice nse is granted under any patents or patent rights of Matrox Electronic Systems Ltd. Unauthorized recording or use of broadcast television programming, video tape, or other copyrighted material may violate copyri ght laws. Matrox Electronic Systems Ltd. assumes no responsibility for the illegal duplication, use, or other acts that infringe on the r ights of copyright owners.

Matrox Electronic Systems Ltd. 1055 St. Regis Blvd., Dorval, Quebec, Canada H9P 2T4 Tel: [phone] Fax: [phone] World Wide Web: www.matrox.com

Contents

Installing your Matrox MXO2 hardware ...................................................... 1 Installing your PCIe host adapter (Mac Pro) ...................................................... 1 Installing your PCIe host ExpressCard/34 adapter (MacBook Pro) ................... 1 Rack mounting your MXO2 Rack ............................................................... 2 Powering Matrox MXO2 ............................................................................ 4 Powering Matrox MXO2 Rack ................................................................... 5 Connecting MXO2 to your Mac system..................................................... 6 Connecting MXO2 Rack to your Mac system ............................................7 Typical MXO2 digital video connections .................................................... 8 Typical MXO2 Rack digital video connections ........................................... 9 Installing your Matrox MXO2 software ..................................................... 10 Registration and customer support ......................................................... 10 Contacting us ..................................................................................................10

i

i

C

Your notes

o

n

t

e

n

t

s

This guide provides brief installation instructions for installing your Matrox MXO2 hardware and software. It is intended to help you quickly set up your Matrox MXO2

A

PCIe cable

Matrox PCIe ExpressCard/34 adapter

A

ExpressCard/34 slot

1

2

Rack mounting your MXO2 Rack Use the supplied rackmount brackets to mount your Matrox MXO2 Rack to a standard 19-inch rack. The rackmount brackets can be used to either front or rear mount your MXO2 Rack. You can also mount MXO2 Rack so that it’s recessed to allow more space for cables. MXO2 Rack takes up two vertical rack unit spaces. 1 Unpack the two rackmount brackets and their eight mounting screws. ²Caution Use only the screws supplied with your MXO2 Rack to attach the rackmount brackets to your MXO2 Rack. If you use screws that are larger or longer than the ones supplied, you can damage your equipment. 2 Depending if you want to front or rear mount your MXO2 Rack, position the rackmount brackets so that the bracket face is either towards the front (connector side) or the back of your MXO2 Rack. 3 MXO2 Rack can be recess mounted to allow extra space for connectors and cables. Depending on your mounting needs, align the screw holes on each rackmount bracket with the desired screw holes on either side of the MXO2 Rack. ²Caution For stability and safety, whichever mounting method you choose, make sure to fasten each rackmount bracket to MXO2 Rack using all four supplied screws. 4 Using a hand screwdriver only ( no power screwdrivers ), carefully tighten each screw until snug. Do not overtighten! 5 Fasten your MXO2 Rack to the standard 19-inch rack as per your rack’s instructions.

Rack mounting your MXO2 Rack

Rackmount bracket

MXO2 Rack

Front rackmounting

Rear rackmounting

Recessed rackmounting

3

Rack mounting your MXO2 Rack

4

Powering Matrox MXO2 You can power MXO2 using an AC outlet via the Matrox external power supply and a power cord, or using a battery via the Matrox battery power cable. For battery requirements and guidelines, see your Matrox MXO2 Installation and User Guide . For a list of batteries recommended for use with your MXO2, visit the Matrox MXO2 Support section of our website at www.matrox.com/video/support .

External Power button power supply

IEC-C13 power cord

To AC outlet Powering Matrox MXO2

OR

Female 4-pin XLR cable

MXO2 (side view)

²Caution When disconnecting the power supply from MXO2, make sure that you slide back the casing on the connector to release the locking mechanism.

Matrox battery power cable

Battery on a universal battery adapter

Powering Matrox MXO2 Rack You can power MXO2 Rack using an AC outlet and an IEC-C13 power cord.

MXO2 Rack

IEC-C13 power cord

To AC outlet

5

Powering Matrox MXO2 Rack

6

Connecting MXO2 to your Mac system Connect MXO2 to your Mac Pro or MacBook Pro using the Matrox PCIe cable. ¡ I to m  p M o X rt O a 2 n , t and F i o t r m M us X t O b 2 e t c o o  n be n  e detectedonaMac   P Prosys o te re m s , t p ar o ti w n e g r   y m o u u s r t   c b o e m su p p ut p e li r. ed cted to your Mac ro bef

A

PCIe cable

Matrox PCIe host adapter

A

Connecting MXO2 to your Mac system

MXO2 (side view)

²Caution Ensure proper orientation when connecting the PCIe cable to avoid damaging the cable or host connector.

Matrox PCIe host ExpressCard/34 adapter OR

To your MacBook Pro’s ExpressCard/34 slot (see “Installing your PCIe host ExpressCard/34 adapter (MacBook Pro)” on page 1 ).

Connecting MXO2 Rack to your Mac system Connect MXO2 Rack to your Mac Pro or MacBook Pro using the Matrox PCIe cable. port XO2 Rack to be detected on a Mac Pro system, power must be ¡ I su m pplied a t n o t MX Fo O r 2 M Rack,anditmustbeconnectedtoyourMacProbeforestarting your computer.

MXO2 Rack

A

PCIe cable

²Caution Ensure proper orientation when connecting the PCIe cable to avoid damaging the cable or host connector.

Matrox PCIe host Matrox PCIe  ExpressCard/34 host adapter  adapter OR

To your MacBook Pro’s ExpressCard/34 slot (see “Installing your PCIe host ExpressCard/34 adapter (MacBook Pro)” on page 1 ). A

7

Connecting MXO2 Rack to your Mac system