Generic projector lamp

Description

http://www.sunbowslamp.com
OEM too expensive? Cheap price lamp but bad quality? Why not choose Sunbows replacement projector lamps. Resonable price and reliable quality.

Informations

• Publié par: ferelrew
• Publié le: 16 août 2016
• Nombre de lectures: 2
• Langue: English

Extrait

We don't sell lamps, we only provide technical support In the market, there are many different quality and price for the lamps, and because the quality are different, the price is quite different.

For projector lamp, there are OEM lamp, and also have compatible, for the stage moving head lamp, there are famous bulb manufacturer and also have the compatible lamp factory, in the recent years, there have been some good manufacturers.

In the projector lamp industry for many years, I learned a lot of information of lamps, the first type: OEM, the top quality, from the box to the lamp housing, and bulb, all from original factory, same as the lamp that in your projector, but really too expensive. The second type: OWH, original Philips or osram bulb in the generic housing, for this type lamp, the bulb is same as the OEM, the housing is made by the third party, so that quality is same as OEM, but price may be just half or more less than OEM. The third type is CWH/CM compatible bulb with housing, this type lamp is from the housing and bulb and the box all from the third party factory, the quality can not be control, some are good quality, some are bad.

Let’s to Đoŵpaƌe these 3 types: OEM of Đouƌse the Ƌuality staŶdaƌd , ďut the OWH have the same performance with it, so that of course will be ďeateŶ ďy the OWH. Noǁ, let’s Đompare OWH and CWH, According to my experience to understand, both of them, all can be choose by end user, but of course depend on what the user need. CWH, the low price has its aďsolute Đoŵpetitiǀe adǀaŶtage. Let’s to disĐus the situatioŶ of the market: about OWH, the more and more user from USA and Europe to choose this, because the quality is reliable, user should not worry theiƌ ďulď’s ďƌightŶess Ŷot eŶough oƌ the laŵp life is too shoƌt, aŶd the most important is that much cheaper than OEM(but still higher than the CWH). AŶd Ŷoǁ let’s talk aďout the CWH, AĐĐoƌdiŶg to ŵy ƌeseaƌĐh, I'ǀe found no matter like USA only pursuit of low price, but also in the Europe pursuit of the cost–effeĐtiǀe, the CWH’s deŵaŶd is ƌisiŶg. TheŶ the question come, For some big American dealers I found that, they sell the CWH very low price, very very low price, but some BBS or blog show that, there are many negative comment for these low price CWH, and they leaǀe ŵessage to suggest otheƌs doŶ’t ďuy laŵps fƌoŵ the dealeƌ. This means the CWH is low price , but quality is very bad. Then we ask

the dealer why the bad quality happen, then they said the products buy from some China and Taiwan factory, the quality not good, and then we try to contact the factory from China and Taiwan, finally, we get some results, we found that there is the contradiction between the supplier and the USA dealers, the dealers want the lowest price for the cost of the lamps, then the supplier want to win the market, of course they only can use the poor quality material to produce. This way leads to manufacturer dealers sell defective goods to the United States, U.S. dealers sell defective goods to end users. how sad a cycle.

For many years research of the projector lamp, we finally find some tƌusted ŵaŶufaĐtuƌeƌs of CWH, that’s good Ŷeǁ foƌ eŶd useƌ. SuŶďoǁs photronic co., ltd just one of that manufacturer, through the testing of their lamps, we found that the CWH that they produce, the burner all original Philips or osram burner, the lamp life and brightness all reliable. Beside this, their Housing's plastic material all PPS, are only used once, not recycling or ref urbishment, for the lens,40 coating layer of the lens, can effectively cut off the high tempera ture that produced by UV/IR, can improve the the bulb lifespan and brig htness, All the material have passed SGS testing, lamp wire achieved UL758, lamp pin and terminal achieved UL310, so that the CWH from this company are reliable, their lamps called: sunbows module.

By the way, we should also talk about the moving head lamp source of Sunbows, their R&D team, committed to produce a high performance light source for moving head lamp. Compare the projector lamp and the moving head lamp, because the moving head lamp is working in the moving situation, so that their moving head bulb all use the original Japan cement to produce the lamp, this cement can let ceramic and lamp cup adhesion more solid, then can let the lamp life longer. So that, the lamp of Sunbows with its high quality and low price, got the high praise from user, more and more China factory for the moving head machine, to choose the Sunbows lamp now.

After tested, I found that there are many different quality of the lamps iŶ the ŵaƌket, ďut SuŶďoǁs’ Ƌuality ĐaŶ ďe tƌusted, I ďelieǀe that iŶ the future of the lamps industry, there are more and more company will like Sunbows, to produce the Cost-effective products.

I doŶ’t sell laŵps, ďut, if you want to contact Sunbows, you can add their sales’ skype: MiĐhael_suŶďoǁs oƌ eŵail theŵ: [e-mail] Only want this lamp industry have a better development direction, eliminate some low quality factory, let the powerful manufacturers to provide more service for you.