LCD Screen one(for PS™) Écran LCD(pour PS one™) Pantalla LCD one(para PS™)
English Instruction manual Thank you for purchasing the LCD screen (for PS one™). Before using this product, carefully read this manual and retain it for future reference. This LCD screen is exclusively for use with PS one™consoles that have the symbol marked on the console bottom.
Français Mode d’emploi Nous vous remercions d’avoir fait l’acquisition de l’écran LCD (pour PS one™produit, lisez attentivement ce mode d’emploi et). Avant d’utiliser ce conservez-le pour pouvoir vous y reporter ultérieurement. Cet écran LCD est conçu pour une utilisation exclusive avec les consoles PS one™ portant la désignation .
Español Manual de instrucciones Gracias por adquirir la pantalla LCD (para PS one™). Antes de utilizar este producto, lea detenidamente este manual y consérvelo para consultarlo en el futuro. Esta pantalla LCD está diseñada para utilizarse exclusivamente con las consolas PS one™que lleven marcado el símbolo en la parte inferior.
SCPH-131 / 94017
© 2002 Sony Computer Entertainment Inc. All rights reserved.
To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not disassemble. Refer servicing to qualified personnel only.
Use the supplied SCPH-121 AC adaptor only. Note that use of any other power supply device (including the SCPH-113 AC adaptor supplied with the PS one™console) may result in fire, electrical shock or damage to the unit. This AC adaptor is not intended to be serviced. Should the product cease to function in its intended manner, it should be returned to the manufacturer or be discarded.
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
This graphical symbol with supplemental marking is located on the bottom of the PS on™le e conso .
This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
For customers in the USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved
in this manual could void your authority to operate this equipment.
Read before operating the LCD screen (for PS one™) A very small percentage of individuals may experience epileptic seizures when exposed to certain light patterns or flashing lights. Exposure to certain patterns or backgrounds on a television screen or while playing video games, including games played on the LCD screen (for PS one™), may induce an epileptic seizure in these individuals. Certain conditions may induce previously undetected epileptic symptoms even in persons who have no history of prior seizures or epilepsy. If you, or anyone in your family, has an epileptic condition, consult your physician prior to playing. If you experience any of the following symptoms while playing a video game - dizziness, altered vision, eye or muscle twitches, loss of awareness, disorientation, any involuntary movement, or convulsions -IMMEDIATELY discontinue use and consult your physician before resuming play.
Owner’s record The model and serial numbers are located on the bottom of the LCD screen (for PS one™). Record the appropriate number in the space provided below. Refer to these numbers whenever you call for technical assistance at 1-800-345-7669. Model No. SCPH-131 Serial No. _________________
Table of contents
Checking the package contents
Connecting the LCD screen to the PS one™console
Using the LCD screen
Adjusting the brightness of the screen
Adjusting the volume
Using headphones with the LCD screen
Connecting the PS one™console to a TV set
Connecting video equipment to the LCD screen
For your protection, please read these safety instructions completely before operating the appliance, and keep this manual for future reference. Carefully observe all warnings, precautions and instructions on the appliance, or those described in the instruction manual and adhere to them.
Power sources This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of electrical power supplied to your home, consult your dealer or local power company. For those units designed to operate from battery power, or other sources, refer to the operating instructions.
Grounding or polarization The unit is equipped with a polarized AC power cord plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.
Overloading Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.
Liquid and foreign objects Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.
Attachments Do not use attachments not recommended by the manufacturer, as they may cause hazards.
Cleaning Unplug the unit from the wall outlet before cleaning or polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the unit.
Important safeguards (continued)
Water and moisture Do not use the powerline operated unit near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.
Power cord protection Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against it, paying particular attention to the plugs, receptacles, and the point where the cord exits from the unit.
Ventilation The slots and openings in the cabinet are provided for necessary ventilation. To ensure reliable operation of the unit, and to protect it from overheating, these slots and openings must never be blocked or covered. Never cover the slots and openings with a cloth or other – materials. – Never block the slots and openings by placing the unit on a bed, sofa, rug or other similar surface.
Accessories Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or an adult, and serious damage to the unit. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer.
An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
– Never place the unit in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
– Do not place the unit near or over a radiator or heat register, or where it is exposed to direct sunlight.
Outdoor Antenna Grounding – If an outdoor antenna or cable system is installed, follow the precautions below.
An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits. WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM, EXTREME CARE SHOULD BE TAKEN TO KEEP FROM CONTACTING SUCH POWER LINES OR CIRCUITS AS CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of an nit, connection to grounding electrodes, and requirements for ctrode.
Electric Service equipment
Power Service Grounding Electrode System (NEC Art 250, Part H)
Antenna Lead in Wire
Antenna Discharge unit (NEC Section 810-20)
Grounding Conductors (NEC Section 810-21)
Lightning For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power-line surges.
Important safeguards (continued)
Damage requiring service Unplug the unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: – When the power cord or plug is damaged or frayed.
– If liquid has been spilled or objects have fallen onto the unit.
If the unit has been exposed to rain or water.
– If the unit has been subject to excessive shock by being dropped, or the cabinet has been damaged.
FRAYED OR TAUT CORD
If the unit does not operate normally when following the instruction manual. Adjust only those controls that are specified in the instruction manual. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to normal operation.
When the unit exhibits a distinct change in performance – this indicates a need for service.
Servicing Do not attempt to service the unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Replacement parts When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety check Upon completion of any service or repairs to the unit, ask the service technician to perform routine safety checks (as specified by the manufacturer) to determine that the unit is in safe operating condition.
Vehicle safety The PS one™console can be used in a vehicle when connected to an LCD screen (for PS one™) and SCPH-170Ucar adaptor (for PS one™) (sold separately). For safe operation, follow these precautions: • Before using the console in a vehicle, carefully read the instruction manual supplied with the car adaptor (for PS one™). • Never use the console while operating a vehicle or when seated in the front passenger seat. Only backseat passengers should use this product. • Make sure that the product and its parts, such as the car adaptor cord, do not interfere in any way with the driver’s operation of the vehicle. • Do not use the console in such a way that it could distract the driver. • Observe all laws governing the use of portable devices in vehicles. • Make sure that the console will not interfere with the air bag or cause injury if the air bag system is deployed. • Do not leave the console or LCD screen in a vehicle with its windows closed, as this could damage these products. • Do not leave the car adaptor plugged in when the vehicle is not in use. • Never leave children unattended in a vehicle, whether playing with the PS one™ console or not.
Safety This product has been designed with the highest concern for safety. However, any electrical device, if used improperly, has the potential for causing fire, electrical shock or personal injury. To ensure accident-free operation, follow these guidelines: • Observe all warnings, precautions and instructions. • Stop use immediately if the device functions in an abnormal manner, or produces unusual sounds or smells. • Do not touch the AC adaptor with wet hands. • Do not touch or ingest any fluid leaking from a damaged LCD screen (for PS one™). If any fluid gets into the eyes or mouth, flush with water and consult a physician immediately. • If the device does not function properly, contact our technical support line at 1-800-345-7669 for assistance.
Health To help prevent eye strain: • Take a break of about 15 minutes during every hour of play. • Do not play a game when you are tired or short of sleep. • Play in a well-lit room and keep a safe distance from the LCD screen. When using headphones with the LCD screen, turn the volume down as far as it will go before putting on the headphones. Adjust the volume as necessary after the game or audio CD has started.
Listening to loud sounds for an extended period of time can have a harmful effect on one’s hearing. This is especially true when using headphones. When using headphones, keep the volume at a moderate level to avoid harming your ears. If you experience a ringing in your ears, turn the volume down or stop use of the headphones.
Avoid prolonged physical contact with the LCD screen or AC adaptor as this may cause low temperature burns.
Use and handling Failure to follow the precautions below may result in damage to the LCD screen (for PS one™), the PS one™console or the disc in use. • Operate the LCD screen only on 120V AC, 60 Hz. • Never disassemble or modify the LCD screen or AC adaptor. • Do not expose the LCD screen or AC adaptor to high temperatures, high humidity, or direct sunlight, or to extreme cold (use in an environment where temperatures range 5°C-35°C/41°F-95°F). • Do not use the LCD screen in a dusty location. • Do not block the air vents or wrap up the LCD screen, as doing so may cause heat to build up internally. • Do not use the LCD screen on a rug or carpet. • Do not allow liquid or small particles to get into the LCD screen. • Do not put heavy objects on the LCD screen or AC adaptor. • Do not throw or drop the LCD screen or AC adaptor, or subject either item to strong physical shock. • Do not shake the LCD screen while in use, or subject it to vibration. • Do not place, or use the LCD screen on an unstable surface. • Do not place the LCD screen close to magnetic fields.
Screen • Direct exposure to sunlight may damage the screen. Be careful when using the LCD screen outdoors or near a window. • Do not push on, scratch or put objects on top of the screen as this may damage it. • When using the LCD screen in a cold environment, you may notice shadows on the graphics or the screen may appear darker than usual. This is not a malfunction and the screen will return to normal when the temperature goes up. • Do not leave still images displayed on the screen for extended periods of time. This may cause a faint image to be left permanently on the screen. • Some parts of the LCD screen may become warm during use. This is a normal condition. However, if any part of the unit becomes hot to the touch, remove the AC adaptor from the electrical outlet immediately and contact our technical support line at 1-800-345-7669 for assistance.
Soyez le premier à déposer un commentaire !
Vous aimerez aussi