La lecture en ligne est gratuite
Le téléchargement nécessite un accès à la bibliothèque YouScribe
Tout savoir sur nos offres
Télécharger Lire

BRIO Solid Plastic Laminate Partition

De
4 pages
BRIO Solid Phenolic Partitions Section 10,161 For Toilet Stalls With Institutional Hardware Page 1 of 4 Part 1: General 1.1 General Conditions .1 Clauses of General Conditions and Complimentary Conditions are an integral part of this section and are applied. 1.2 Related Work .1 Furring Section 06100 .2 Toilet Accessories Section 10800 1.3 Samples .1 Submit a sample measuring [ 6 x 6 in. ] [150 x 150 mm.] showing the finish on both sides as well as two finished edges. .2 Submit a representative sample of each piece of hardware, including brackets, fasteners, and trim. 1.4 Shop Drawings .1 Submit shop drawings in accordance with Section 01340. .2 The drawings must clearly indicate details, plans, elevations, hardware, and installation details. 1.5 Maintenance Data .1 Provide instructions for the proper maintenance of plastic laminate which must be incorporated in the maintenance and user’s manual. 1.6 Protection .1 Protect finished laminated plastic surfaces during shipment and installation with the use of heavy kraft paper or by placing them in cardboard boxes. 1.7 Guarantee .1 Provide a written guarantee, signed and issued in the name of the owner stating that the laminated plastic work is guaranteed against warping and delamination for a period of one [1] year. The door hardware is guaranteed against all defects in ...
Voir plus Voir moins
BRIO Solid Phenolic Partitions
Section 10,161
For Toilet Stalls
With Institutional Hardware
Page 1 of 4
Part 1: General
1.1 General Conditions
.1
Clauses of General Conditions and Complimentary
Conditions are an integral part of this section and
are applied.
1.2 Related Work
.1
Furring
Section 06100
.2
Toilet Accessories
Section 10800
1.3 Samples
.1
Submit a sample measuring [ 6 x 6 in. ]
[150 x 150 mm.] showing the finish on both sides
as well as two finished edges.
.2
Submit a representative sample of each piece of
hardware, including brackets, fasteners, and trim.
1.4 Shop Drawings
.1
Submit shop drawings in accordance with
Section 01340.
.2
The drawings must clearly indicate details, plans,
e
l
e
v
a
t
i
o
n
s
,
h
a
r
d
w
a
r
e, and installation details.
1.5 Maintenance Data
.1
Provide instructions for the proper maintenance of
plastic laminate which must be incorporated in the
maintenance and user’s manual.
1.6 Protection
.1
Protect finished laminated plastic surfaces during
shipment and installation with the use of heavy
kraft paper or by placing them in cardboard boxes.
1.7 Guarantee
.1
Provide a written guarantee, signed and issued in
the name of the owner stating that the laminated
plastic work is guaranteed against warping and
delamination for a period of one [1] year. The
door hardware is guaranteed against all defects in
workmanship for a period of two [2] years from
the date of signing the Certificate of Reception of
the work. The heavy-duty door latch is guaranteed
for life (it will be replaced free of charge with
t
h
e
r
e
t
u
r
n
o
f the defective part).
BRIO Solid Phenolic Partitions
Section 10,161
For Toilet Stalls
With Institutional Hardware
Page 2 of 4
Part 2: Products
2.1 Materials
.1
Solid Phenolic toilet partitions, floor mounted
overhead braced BRIO by EAD, distributed by
Sani-tech, Inc. (418) 836-0616.
.2
Solid plastic laminate: in conformity with
CAN3-A172-M79, category SS (self-supporting), of
[19mm.] [3/4 in.] thickness and solid color on both
surfaces with a black core. Solid plastic must be
integral with core: glued plastic laminate on a solid
core is not acceptable.
2.2.1
Satin-Finish Stainless Steel Hardware
.1.A
Full-length piano hinges for standard toilet
compartments, in heavy-duty 16-gauge stainless
steel type 304, finish #4, inward opening, invisible
from the outside. Model with emergency access
by lifting the door. EAD Product 211-000 or
211-001.
.1.B
Full-length piano hinges for handicapped-access
toilet compartments. In heavy-duty 16-gauge
stainless steel type 304, finish #4, outward opening,
invisible from outside. Model with emergency
access by lifting the door. EAD Product 211-010 or
211-011.
.2.A
Door latch for standard and handicapped
compartments in heavy-duty 11-gauge stainless
steel type 304, finish #4. Door latch with a handle
that can be grabbed with the hand equipped with
two intregated damping devices. EAD Products
#200-101, guaranteed for life.
.2.B
Heavy-duty door stop for inward or outward
opening doors. EAD Product no. 2304617.
.3
Coat hook. Heavy-duty, in 11-gaugestainless steel
type 304, finish #4 in conformity with standard
5.2.1.c, CAN/CSA-B651-95. EAD Product
#200-233.
BRIO Solid Phenolic Partitions
Section 10,161
For Toilet Stalls
With Institutional Hardware
Page 3 of 4
.4
Pilaster shoes in 18-gauge stainless steel, type 304,
finish #4, invisible from outside, of a size
proportional to the pilaster. EAD Product
#550-000.
.5.A
Supports and full-length assemblage sections in
extruded anodized aluminum alloy 6063, tempering
#5 with clear anodizing, 10 microns. EAD Products
#162-000.
.5.B
Overhead brace in extruded anodized aluminum
alloy 6063, tempering #5 with clear anodizing, 10
microns, anti-theft with grip-resistant edges. EAD
Product #182-000.
.6
Pull in D for handicapped-access toilet
compartments in 11-gauge stainless steel, type 304,
finish #4, in conformity with standards 4.2.6.1 and
5.2.2.d, and e, CAN/CSA-B651-95. EAD Product
#210-110.
.7
Anti-theft mounting screws in stainless steel, type
410BH with a special setting which can be removed
with an adapted tool. EAD Products 29308-012 and
29312-058.
.8
Stainless steel sheet metal in conformity with
standard ASTM A167-82.
2.3 Fabrication
.1
Fabricate doors and partitions of solid
phenolic plastic, [19mm.] [3/4 in.] thick
to the sizes indicated.
.2
Bevel exposed edges uniformly at approximately
20 degrees.
Part 3:Installation
3.1 Partition
.1
With the aid of the appropriate supports, fix the
partitions to the floor perpendicular and square;
brace them tightly.
3.2 Cleaning
.1
At the completion of the installation, remove all
the protective elements, clean finished surfaces
so that they are free of blemishes or spots.
BRIO Solid Phenolic Partitions
Section 10,161
For Toilet Stalls
With Institutional Hardware
Page 4 of 4
.2
Polish the metallic parts and replace those which
are defective or damaged.
End of section
Un pour Un
Permettre à tous d'accéder à la lecture
Pour chaque accès à la bibliothèque, YouScribe donne un accès à une personne dans le besoin