Save Time with a Cargo Control Checklist

Cocp

Informations

• Publié par: seorumer
• Publié le: 28 octobre 2016
• Nombre de lectures: 2
• Langue: English

Extrait

Save Time with a Cargo Control Checklist Working as a flatbed truck driver involves spending time waiting for cargo to be loaded and secured before hitting the road. This is time a driver is usually not compensated for, so getting things done as quickly as possible is paramount to getting the wheels turning again. Still, drivers have to be thorough in their cargo control procedures so as to not jeopardize their loads.

A good way to save time and ensure cargo is properly secured is to establish a cargo control checklist that becomes a standard operating procedure. While this may sound obvious, you might be surprised how many drivers have no such checklist in place. They approach every load in a random matter, where cargo control is dictated by immediate circumstances. Having a checklist in place is a better option because it ensures all of the necessaries are addressed in a way that eventually leads to the driver following his or her checklist routine as a matter of habit. It should be noted that a cargo control checklist does not have to be a formal document that the driver prints out by the hundreds so that each load has its own piece of paper. A driver may create a document to start with, but after following the checklist routine numerous times, most drivers are going to memorize it. Then it becomes a mental exercise rather than a paper one. Cargo Control Checklist Basics How a driver organizes his or her cargo control checklist is a matter of preference. There should be certain categories of thiŶgs oŶ everLJ driver’s checklist, thiŶgs that are appropriate to cargo coŶtrol. For edžaŵple:  Tarps and Straps–Truck tarps and straps should be inspected prior to arriving to pick up a load. Not inspecting cargo control supplies increases the likelihood of getting to a job and finding that damaged equipment cannot be used. Then the driver is slowed down while he or she searches locally for replacements.

 Inspecting Loads–Flatbed truck drivers are ultimately responsible for how cargo is loaded on their trailers. There should be a process in place for inspecting loads to make sure weight issues are addressed, there is no unnecessary space between cargo items, and that cargo is properly blocked if necessary.  Securing the Cargo–Once a trailer has been loaded and securing has commenced, a system should be in place so that tarps and straps are always applied in the same way. For example, some truckers will first make sure all of their straps and/or chains are applied, then walk around the trailer to tighten down each winch consecutively.  Final Inspection–Just prior to departure, the truck driver should be performing a vehicle safety inspection as a matter of routine. Within that inspection, he or she can also make provision to do a final inspection ofcargo control equipment. Straps, chains, and tarps should all be given the once over.  Inspections on the Road–Lastly, an important part of a cargo control checklist that should not be ignored are the inspections done while on the road. Drivers should be checking their loads within the first 50 miles of departure and then with every additional stop along the way. The same checklist used for the final inspection is appropriate to on-the-road inspections. Cargo control is a normal part of flatbed trucking. Drivers can save time and do a better job of securing cargo by developing a cargo control checklist and following it on every job. A well-designed checklist turns what could be a random exercise into something that becomes routine. Visit:Mytee Products