2008 Injection Molders Benchmark Survey

Carlesimom

Informations

• Publié par: Pheyn
• Nombre de lectures: 22
• Langue: English

Extrait

SURVEY RESULTS
2008 Canadian Plastics Injection Molding SurveySURVEY RESULTS
1. Which best describes the molding operations at your plant?
Exclusively captive molding
0.00%
Exclusively proprietary
8.80%
Exclusively custom molding
47.10%
Captive molding with some
5.90%
custom molding
Custom molding with some
38.20%
proprietary molding
0% 5% 10% 15% 20% 25% 30% 35% 40% 45% 50%
2008 Canadian Plastics Injection Molding SurveySURVEY RESULTS
2. How many employees work at your plant?
250
0.00%
100 - 249
5.70%
50 - 99
20.00%
20 - 49
17.10%
10 - 19
22.90%
1 - 9
34.30%
0% 5% 10% 15% 20% 25% 30% 35% 40%
2008 Canadian Plastics Injection Molding SurveySURVEY RESULTS
3. What is the number of injection molding machines at your plant?
16+
12.10%
11 - 15
21.20%
6 - 10
27.30%
1 - 5
39.40%
0% 5% 10% 15% 20% 25% 30% 35% 40% 45%
2008 Canadian Plastics Injection Molding SurveySURVEY RESULTS
4. Indicate how many injection molding machines at your plant fall into each
tonnage range.
12345678
Less than 99
tons
17.4% 30.4% 30.4% 8.7 % 0.0% 4.3% 0.0% 0.0%
100 - 249 tons
16.0% 24.0% 32.0% 4.0% 12.0% 0.0% 0.0% 4.0%
250 - 499 tons 9.5% 47.6% 14.3% 9.5% 9.5% 0.0% 0.0% 0.0%
500 - 749 tons
53.8% 23.1% 0.0% 0.0% 0.0% 15.4% 0.0% 0.0%
750 - 1499 tons 83.3% 0.0% 0.0% 0.0% 16.7% 0.0% 0.0% 0.0%
1500+ tons 33.3% 33.3% 33.3% 0.0% 0.0% 0.0% 0.0% 0.0%
2008 Canadian Plastics Injection Molding SurveySURVEY RESULTS
5. What percentage of your machinery is more than five years old?
Over 75%
50.00%
51 - 75%
15.60%
31 - 50%
15.60%
0 - 30%
18.80%
0% 10% 20% 30% 40% 50% 60%
Sample size: 48
2008 Canadian Plastics Injection Molding SurveySURVEY RESULTS
6. Will new injection molding machines be purchased for this plant within the next
year?
No 73.50%
Ye s
26.50%
0% 10% 20% 30% 40% 50% 60% 70% 80%
2008 Canadian Plastics Injection Molding SurveySURVEY RESULTS
7. a) Do you intend to buy...
Both
37.50%
Pre-owned machines
37.50%
New machines
25.00%
0% 5% 10% 15% 20% 25% 30% 35% 40%
2008 Canadian Plastics Injection Molding SurveySURVEY RESULTS
7. b) Is it for replacement of old equipment or for additional capacity?
Additional capacity 50.00%
Replacement
50.00%
0% 10% 20% 30% 40% 50% 60%
2008 Canadian Plastics Injection Molding SurveySURVEY RESULTS
8. Will new auxiliary equipment be purchased for this plant within the next year?
No 36.40%
Ye s
63.60%
0% 10% 20% 30% 40% 50% 60% 70%
2008 Canadian Plastics Injection Molding Survey