Instruction SheetPRO CRIMPER* III Hand Crimping Tool Assembly

Us023028

Description

Niveau: Secondaire, Lycée, Terminale
Instruction SheetPRO-CRIMPER* III Hand Crimping Tool Assembly 58546- 2 408- 8678 LOC B 1 of 6E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved TE logo is a trademark. *Trademark. Other product names, logos, or company names might be trademarks of their respective owners. TOOLING ASSISTANCE CENTER 1--800--722--1111 PRODUCT INFORMATION 1--800--522--6752 This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at 17 Mar 11 Rev Cwith Die Assembly 58545- 1 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended- use, production operations is available. The PRO-CRIMPER III Hand Crimping Tool is a “Commercial” grade tool and is designed primarily for field installation, repair, maintenance work, or prototyping in industrial, commercial, or institutional applications. Product crimped with this tool will meet the crimp height requirement for hand tools in the appropriate 114 series specification, but may not comply with other feature parameters of the specification. TE offers a variety of tools to satisfy your performance requirements. For additional information, contact the Tooling Assistance Center at 1- 800- 722- 1111.

• die assembly


• before using


• inspection hole


• splice


• crimping chamber


• screw through


• wire size


• inspection


• tool

Sujets

• Première
• Tyco Electronics
• Splice
• Inspection

Informations

• Publié par: profil-zyan-2012
• Nombre de lectures: 27
• Langue: English

Extrait

PRO- CRIMPER* III Hand Crimping Tool Assembly 58546- 2 with Die Assembly 58545- 1

Instruction Sheet 408-8678 17 Mar 11Rev C

PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.

Front of Tool

Die Assembly

Moving Jaw

Ratchet Adjustment Wheel

The PRO-CRIMPER III Hand Crimping Tool is a “Commercial” grade tool and is designed primarily for field installation, repair, maintenance work, or prototyping in industrial, commercial, or institutional applications. Product crimped with this tool will meet the crimp height requirement for hand tools in the appropriate 114 series specification, but may not comply with other feature parameters of the specification. TE offers a variety of tools to satisfy your performance requirements. For additional information, contact the Tooling Assistance Center at 1-800-722-1111.

Stationary Jaw

Back of Tool (Wire Side) Pivot Pin

PRO-CRIMPER III Hand Crimping Tool Frame 354940-1 (408-9930)

Stationary Handle

Moving Handle

Wire TE Die Assembly Product Family} Size StripLength (AWG) (mm[In.]) SOLISTRAND* Terminal (Standard)22-14 4.37-5.16 [.172-.203] SOLISTRAND Terminal (Standard) and 12-10 6.35-7.14 [.25-.281] Butt Splice 58545-1 SOLISTRAND Terminal (Long Barrel) or 22-14 6.35-7.14 [.25-.281] Butt Splice SOLISTRAND Terminal Parallel Splice22-14 7.94-8.73 [.312-.344] }Contact the Tooling Assistance Center or Product Information (at the number listed below) for specific terminal and splice part numbers. Figure 1

1. INTRODUCTION Read these instructions thoroughly before crimping any terminals or splices. PRO-CRIMPER III Hand Crimping Tool Assembly 58546-2 consists of Die Assembly 58545-1 and PRO-CRIMPER III Hand Crimping Tool FrameDimensions on this sheet are in millimeters [with NOTE 354940-1. The tool is used to crimp the terminals andinch equivalents provided in brackets]. Figures splices onto the wire size listed in Figure 1.are for reference only, and are not drawn to scale. i

E2011 Tyco Electronics Corporation, a TE Connectivity Ltd. CompanyTOOLING ASSISTANCE CENTER 1-800-722-1111 Thiscontrolled document is subject to change. 1of 6 All Rights ReservedPRODUCT INFORMATION 1-800-522-latest revision and Regional Customer Service,6752 For TE logo is a trademark.visit our website atwww.te.com LOC B *Trademark. Otherproduct names, logos, or company names might be trademarks of their respective owners.