BRIO Solid Plastic Laminate Partition

Stephen P. Adamian

Informations

• Publié par: Zaun
• Nombre de lectures: 26
• Langue: English

Extrait

BRIO Solid Phenolic Partitions

Section 10,161

For Toilet Stalls

With Institutional Hardware

Page 1 of 4

Part 1: General

1.1 General Conditions

.1

Clauses of General Conditions and Complimentary

Conditions are an integral part of this section and

are applied.

1.2 Related Work

.1

Furring

Section 06100

.2

Toilet Accessories

Section 10800

1.3 Samples

.1

Submit a sample measuring [ 6 x 6 in. ]

[150 x 150 mm.] showing the finish on both sides

as well as two finished edges.

.2

Submit a representative sample of each piece of

hardware, including brackets, fasteners, and trim.

1.4 Shop Drawings

.1

Submit shop drawings in accordance with

Section 01340.

.2

The drawings must clearly indicate details, plans,

e

l

e

v

a

t

i

o

n

s

,

h

a

r

d

w

a

r

e, and installation details.

1.5 Maintenance Data

.1

Provide instructions for the proper maintenance of

plastic laminate which must be incorporated in the

maintenance and user’s manual.

1.6 Protection

.1

Protect finished laminated plastic surfaces during

shipment and installation with the use of heavy

kraft paper or by placing them in cardboard boxes.

1.7 Guarantee

.1

Provide a written guarantee, signed and issued in

the name of the owner stating that the laminated

plastic work is guaranteed against warping and

delamination for a period of one [1] year. The

door hardware is guaranteed against all defects in

workmanship for a period of two [2] years from

the date of signing the Certificate of Reception of

the work. The heavy-duty door latch is guaranteed

for life (it will be replaced free of charge with

t

h

e

r

e

t

u

r

n

o

f the defective part).

BRIO Solid Phenolic Partitions

Section 10,161

For Toilet Stalls

With Institutional Hardware

Page 2 of 4

Part 2: Products

2.1 Materials

.1

Solid Phenolic toilet partitions, floor mounted

overhead braced BRIO by EAD, distributed by

Sani-tech, Inc. [phone].

.2

Solid plastic laminate: in conformity with

CAN3-A172-M79, category SS (self-supporting), of

[19mm.] [3/4 in.] thickness and solid color on both

surfaces with a black core. Solid plastic must be

integral with core: glued plastic laminate on a solid

core is not acceptable.

2.2.1

Satin-Finish Stainless Steel Hardware

.1.A

Full-length piano hinges for standard toilet

compartments, in heavy-duty 16-gauge stainless

steel type 304, finish #4, inward opening, invisible

from the outside. Model with emergency access

by lifting the door. EAD Product 211-000 or

211-001.

.1.B

Full-length piano hinges for handicapped-access

toilet compartments. In heavy-duty 16-gauge

stainless steel type 304, finish #4, outward opening,

invisible from outside. Model with emergency

access by lifting the door. EAD Product 211-010 or

211-011.

.2.A

Door latch for standard and handicapped

compartments in heavy-duty 11-gauge stainless

steel type 304, finish #4. Door latch with a handle

that can be grabbed with the hand equipped with

two intregated damping devices. EAD Products

#200-101, guaranteed for life.

.2.B

Heavy-duty door stop for inward or outward

opening doors. EAD Product no. 2304617.

.3

Coat hook. Heavy-duty, in 11-gaugestainless steel

type 304, finish #4 in conformity with standard

5.2.1.c, CAN/CSA-B651-95. EAD Product

#200-233.

BRIO Solid Phenolic Partitions

Section 10,161

For Toilet Stalls

With Institutional Hardware

Page 3 of 4

.4

Pilaster shoes in 18-gauge stainless steel, type 304,

finish #4, invisible from outside, of a size

proportional to the pilaster. EAD Product

#550-000.

.5.A

Supports and full-length assemblage sections in

extruded anodized aluminum alloy 6063, tempering

#5 with clear anodizing, 10 microns. EAD Products

#162-000.

.5.B

Overhead brace in extruded anodized aluminum

alloy 6063, tempering #5 with clear anodizing, 10

microns, anti-theft with grip-resistant edges. EAD

Product #182-000.

.6

Pull in D for handicapped-access toilet

compartments in 11-gauge stainless steel, type 304,

finish #4, in conformity with standards 4.2.6.1 and

5.2.2.d, and e, CAN/CSA-B651-95. EAD Product

#210-110.

.7

Anti-theft mounting screws in stainless steel, type

410BH with a special setting which can be removed

with an adapted tool. EAD Products 29308-012 and

29312-058.

.8

Stainless steel sheet metal in conformity with

standard ASTM A167-82.

2.3 Fabrication

.1

Fabricate doors and partitions of solid

phenolic plastic, [19mm.] [3/4 in.] thick

to the sizes indicated.

.2

Bevel exposed edges uniformly at approximately

20 degrees.

Part 3:Installation

3.1 Partition

.1

With the aid of the appropriate supports, fix the

partitions to the floor perpendicular and square;

brace them tightly.

3.2 Cleaning

.1

At the completion of the installation, remove all

the protective elements, clean finished surfaces

so that they are free of blemishes or spots.

BRIO Solid Phenolic Partitions

Section 10,161

For Toilet Stalls

With Institutional Hardware

Page 4 of 4

.2

Polish the metallic parts and replace those which

are defective or damaged.

End of section