Piezoelectric Transformer Integration Possibility in High Power Density Applications
Piezoelectric Transformer Integration Possibility in High Power Density Applications
Manh Cuong Do
press TUD
TUDpress
06.06.200810:14:07
Do Manh Cuong Piezoelectric Transformer Integration Possibility in High Power Density Applications
TUDpress
Do Manh Cuong
Piezoelectric Transformer Integration Possibility in High Power Density Applications
TUDpress 2008
Bibliografische Information der Deutschen Bibliothek Die Deutsche Bibliothek verzeichnet diese Publikation in der Deutschen Nationalbib liografie; detaillierte bibliografische Daten sind im Internet unter http://dnb.ddb.de abrufbar.
Bibliographic information published by Die Deutsche Bibliothek
Die Deutsche Bibliothek lists this publication in the Deutsche Nationalbibliografie;
detailed bibliographic data is available in the Internet at http://dnb.ddb.de
Prof. Dr.Ing. habil. Schreiber Prof. Dr.Ing. habil. Güldner Prof. Dr.Ing. habil. Ng.Ph.Quang Prof. Dr.Ing. Hoffmann
22.12.2007 02.06.2008
ii
For my Parents
iv
Acknowledgements
The research work is a part of project”Lokale Innovative Energiesysteme Local In novative Energy Systems LIES”supported by the Deutsche Forschungsgemeinschaft German Research Foundation at the Dresden University of Technology (TU Dresden).
First of all, I would like to express my sincerest appreciation and gratitude to my academic supervisor, Prof. Dr.Ing. habil. Henry Güldner, for his invaluable guidance, encouragement, and continued support during the course of this research work.
I would like to express my thanks to Prof. Dr.Ing. habil. Nguyen Phung Quang from Hanoi University of Technology for his suggestions and incessantly encouragement, and I want to express my gratitude to Prof. DrIng. Hoffmann from HelmutSchmidt Universität Hamburg for his supports and evaluations
I would like to thank Dr.Ing. Thomas Hanisch for his guidance on the beginning days of the work and his encouragement, opinions during carrying out this research. My thanks also go to Dr.Ing. Bernhard Siessegger from OSRAM Company for his supports and discussions during the time when I was at OSRAM for testing the ignition circuit. I am grateful to Dr. Igor Kartashev from EPCOS Company for his instructions and information about piezoelectric material.
I also wish to send my thanks to Mr. Yuan Mingbo from Konghong Company China, Mr. Clement Chou from ELECERAM TECHNOLOGY Company for supplying the sample for my experiments and applications. Thanks also go to Dr. Vázquez Carazo Alfredo from FACE Company for his support.
My special thanks to all staffs and colleges especially Dr.Ing.habil Witte, Dr.Ing. Frank Benecke, DiplIng. Sven Wendt at Chair of Power Electronic, Faculty of Electrical Engineering and Informatics, Dresden University of Technology for their help in the past years.
vi
From the view point of language, this dissertation was read through and corrected by Mr. David Walker Director of Training Center of Yokogawa Australia. I would like to express my thanks to him for his helps and supports.
Finally, I would like to send my deepest gratitude to my parents and my family for their love, support, incessantly encouragement and waiting hours from my distant home country Vietnam.