Metallurgical treatment of steel in an induction heated ladle

Directorate-General For Translation European Commission

Description

£k% aé>zï ■/■■. Commission of the European Communities technical steel research Steelmaking METALLURGICAL TREATMENT OF STEEL IN AN INDUCTION­HEATED LADLE Report EUR 9628 EN Blow­up from microfiche original Commission of the European Communities technical steel research Steelmaking METALLURGICAL TREATMENT OF STEEL IN AN INDUCTION-HEATED LADLE R. VASSE et al IRSID 185, rue du Président Roosevelt F-78105 SAINT-GERMAIN-EN-LAYE Contract No 7210-CA/310 (3.5.1979-30.4.1982) FINAL REPORT PARI TI N.C Directorate-General Science, Research and Development d— — 1987 ÎUR 9628 EN | Published by the COMMISSION OF THE EUROPEAN COMMUNITIES Directorate-General Telecommunications, Information Industries and Innovation L-2920 LUXEMBOURG LEGAL NOTICE Neither the' Commission of the European Communities nor any person acting on behalf of then is responsible for the use which might be made of the following information ECSC-EEC-EAEC, Brussels · Luxembourg, 1986 1RS ID March 1984 METALLURGICAL TREATMENT OF STEEL IN AN INDUCTION-HEATED LADLE ECSC Project 7210 CA 310 final report R. VASSE et al. SUMMARY The 5-ton ladle induction furnace located at IRSID in MAIZIERES LES METZ is presented in this report. The ladle casing, made of austenitic stainless steel, is fragmented to limit overheating due to FOUCAULT'* currents. It is placed in a furnace of identical structure to crucible induction furnace.

Informations

• Publié par: EUROPEAN-COMMISSION
• Nombre de lectures: 8
• Langue: English
• Poids de l'ouvrage: 7 Mo

Extrait