Second ECSC workshop on steelmaking
394 pages
English

Découvre YouScribe en t'inscrivant gratuitement

Je m'inscris

Découvre YouScribe en t'inscrivant gratuitement

Je m'inscris
Obtenez un accès à la bibliothèque pour le consulter en ligne
En savoir plus
394 pages
English
Obtenez un accès à la bibliothèque pour le consulter en ligne
En savoir plus

Description

Technological problems related to scrap utilization, Brussels, 24 November 1994
Industrial research and development

Sujets

Informations

Publié par
Nombre de lectures 18
Langue English
Poids de l'ouvrage 8 Mo

Extrait

ISSN 1018-5593
European Commission
technical steel research
Second ECSC workshop on steelmaking
Technological problems related to scrap utilization
Brussels, 24 November 1994
Proceedings
EUR 16176 EN STEEL RESEARCH European Commission
Second ECSC workshop on steelmaking
Technological problems related to scrap utilization
Brussels, 24 November 1994
R. Tomellini
Proceedings
Directorate-General XII
Science, Research and Development
1995 EUR 16176 EN LEGAL NOTICE
Neither the European Commission nor any person acting on
behalf of the Commission is responsible for the use which might be made of the
following information
Cataloguing data can be found at the end of this publication
Luxembourg: Office for Official Publications of the European Communities, 1995
ISBN 92-827-4225-3
© ECSC-EC-EAEC, Brussels· Luxembourg, 1995
Reproduction is authorized, except for commercial purposes, provided the source is acknowledged
Printed in Luxembourg FOREWORD
The 2nd ECSC Workshop on Steelmaking "Technological Problems Related to Scrap
Utilization" held in Brussels on 24 November 1994 continues a series of ECSC-supported
workshops devoted to scientific and technical discussion focused on the solution of
technological problems of major interest to the European steelmaking industry.
Almost half of the steel produced comes from recycling. Steel scrap is increasingly
becoming a valuable raw material and losing its original character of a waste product.
The 2nd ECSC Workshop on Steelmaking was dedicated to examining in depth the problems
involved in the utilization of steel scrap in order to achieve high quality steel products under
an approach of general environmental awareness.
The challenge in both industrial/economic and environmental fields is very great and explains
the large number of research projects undertaken, several of which have been or are being
funded through the ECSC Research Programme "Steel".
The success registered by this workshop was mainly due to the extensive knowledge and
specialisation of the participants and on the clearly focused technical nature of the discussion,
as described in these proceedings.
Second ECSC workshop on steelmaking proceedings 77215· report presents the proceedings of the
2nd ECSC Workshop on Steelmaking
"Technological Problems Related to Scrap Utilization "
held in Brussels on 24 November 1994
Chairperson:
Dr R Β Smith
President of the ECSC Technical Research "Steel"
Executive Committee CI "Primary Steelmaking"
Second ECSC workshop on steelmaking proceedings Table of Contents
Foreword
0 Introduction R Β Smith
Technical Contributions
Steel Recycling and Scrap Types F Bregant 0
Scrap Availability and Legislation R Spence 0
BATs for Abatement of Industrial Pollution J G Bartair e, J Vennekens 0
Product Quality Demands C Manque 0
Scrap: Quality, Preparation and Pretreatment J Ρ Birat, D Huin, X Le Coq,
F Lemière, Β Moriamez, J L Roth,
Ρ Russo 0
Scrap Pre-Processing J Peace 0
0 Scrap Melting: BOS G van Unen, R Boom
Scrap : EAF 0 Κ H Heinen
0 Scrap Melting: Other Processes Β C Welbourn
0 Scrap Pre-Heating Developments J D Pedersen
New Developments within the EU 0 Abildgaard 0
New Developments outside the EU J Ρ Birat, S Matsuoka 0
Short Contributions
Trends in Belgium L Philippe 0
Trends in Denmark 0 Abildgaard 0 s in the Netherlands G van Unen, R Boom 0
Trends in Spain 0 J I Larburu s in the United Kingdom D Anderson 0
Technical Evaluation
ECSC Researches on EAF (1981-1993) J M Palacios, J L Arana, A Cubero 0
Concluding Remarks 0 R Β Smith
List of Participants 0
Second ECSC workshop on steelmaking proceedings

  • Univers Univers
  • Ebooks Ebooks
  • Livres audio Livres audio
  • Presse Presse
  • Podcasts Podcasts
  • BD BD
  • Documents Documents