The wear properties of tungsten carbide-cobalt hardmetals from the nanoscale up to the macroscopic scale [Elektronische Ressource] / by Siphilisiwe Ndlovu
The Wear Properties of Tungsten Carbide-Cobalt Hardmetals from the Nanoscale up to the Macroscopic Scale Der Technischen Fakultät der Universität Erlangen-Nürnberg zur Erlangung des Grades DOKTOR-INGENIEUR by Siphilisiwe Ndlovu Erlangen 2009 Das Verschleißverhalten von Wolframkarbid-Kobalt-Hartmetallen von der Nanoskala bis zur Makroskala Der Technischen Fakultät der Universität Erlangen-Nürnberg zur Erlangung des Grades DOKTOR-INGENIEUR vorgelegt von Siphilisiwe Ndlovu Erlangen 2009 Als Dissertation genehmigt von Der Technischen Fakultät der Universität Erlangen-Nürnberg Tag der Einreichung: 22. 09. 2009 Tag der Promotion : 08. 12. 2009 Dekan: Prof. Dr.-Ing. habil. R. German Berichterstatter: Prof. Dr. rer.nat. M. Göken Prof. Dr. S. Virtanen Abstract A study has been conducted on the tribological properties of WC-Co hardmetals by carrying out a series of wear tests from the nanoscale up to the macroscopic scale. The composition of the hardmetals was varied and the binder content ranged from 6 to 15 wt%. The binder in all the samples was cobalt and one of the samples had small additions of Cr C and VC. The WC grain size in the samples ranged from 250 nm 3 2(nano-size) up to 2.65 µm (coarse-grained).