Development of a Heat Transfer Package Applicable to a Large Variety of Fluids

Joint Research Centre

Description

COMMISSION OF THE EUROPEAN COMMUNITIES JOINT RESEARCH CENTRE Institute for Safety Technology EUR 14985 EN Development of a Heat Transfer Package Applicable to a Large Variety of Fluids G. Franchello 1993 COMMISSION OF THE EUROPEAN COMMUNITIES JOINT RESEARCH CENTRE Institute for Safety Technology EUR 14985 EN Development of a Heat Transfer Package Applicable to a Large Variety of Fluids G. Franchello 1993 LEGAL NOTICE Neither the Commission of the European Communities nor any person acting on behalf of the Commission is responsible for the use which might be made of the following information. Catalogue number: CD-NA-14985-EN-C © ECSC-EEC-EAEC Brussels · Luxembourg, 1993 Printed in Italy Abstract This package allows the calculation of the heat transfer coefficient between a solid structure and a two-phase fluid. Correlations have been selected in order to be applicable to a large set of fluids and working conditions. Emphasis is given further to realise a smooth transition between different heat transfer regimes. Content Nomenclature ii Introduction 1 Chapter 1. The HTCMF package 5 1.1 Single phase convection 10 1.2 Forced convective and nucleate boiling4 1.3 Critical heat flux 22 1.4 Film Boiling 27 1.5 Transition Boiling 31 1.6 Critical heat temperature3 1.7 Minimum film boiling1.8 Condensation6 Chapter. A HTCMF application 4Chapter 3.

Sujets

• Sciences et techniques

Informations

• Publié par: JOINT-RESEARCH-CENTRE
• Nombre de lectures: 15
• Langue: English
• Poids de l'ouvrage: 3 Mo

Extrait