Artificial grass installation techniques followed in Scottsdale AZ

Windows

Description

Artiicial grass installation techniques followed in Scottsdale AZ Artiicial grass is a good decision especially for places where there is water scarcity. Maintenance of natural grass lawn comes with a whole lot of responsibilities. Artiicial Grass Installation services in Scottsdale AZ prepares the site thoroughly before starting the installation process. For best results it is advised to pick the best artiicial grass after proper research to ensure its longevity. While choosing artiicial grass never be engrossed in its lushness alone, give importance to the size of the blades, thickness, size and shape. Once you have inalized on the artiicial grass type, it is time to lay the grass. Here are some basic steps to follow while installing artiicial grass 1. Site preparation Once you have decided on the place to lay the artiicial grass, it is time to excavate and prepare the surface. Remove all the organic matter, bark, plant roots, grass, weeds and other decomposing material. As soon as the site is clean and bare, it is time to make changes to the drainage, sewer, irrigation, gas and electric outlets. Moreover, any additional landscaping features like gardens, water fountains, walkways, patio, etc needs to be in place before building the artiicial grass. 2. Stabilize the site After the preparation is done, the site has to be stabilized using construction fabrics. This helps to separate the new base from mixing with the existing soil.

Informations

• Publié par: joearmijo
• Publié le: 23 février 2017
• Nombre de lectures: 2
• Langue: English

Extrait

ArtiIcial grass installation techniques followed in Scottsdale AZ

ArtiIcial grass is a good decision especially for places where there is water scarcity. Maintenance of natural grass lawn comes with a whole lot of responsibilities. ArtiIcial Grass ïnstallation services in Scottsdale AZ prepares the site thoroughly before starting the installation process. For best results it is advised to pick the best artiIcial grass after proper research to ensure its

longevity. While choosing artiIcial grass never be engrossed in its lushness

alone, give importance to the size of the blades, thickness, size and shape.

Once you have Inalized on the artiIcial grass type, it is time to lay the grass.

Here are some basic steps to follow while installing artiIcial grass 1. Site preparation

Once you have decided on the place to lay the artiIcial grass, it is time to

excavate and prepare the surface. Remove all the organic matter, bark, plant

roots, grass, weeds and other decomposing material. As soon as the site is

clean and bare, it is time to make changes to the drainage, sewer, irrigation,

gas and electric outlets. Moreover, any additional landscaping features like gardens, water fountains, walkways, patio, etc needs to be in place before building the artiIcial grass.

2. Stabilize the site

After the preparation is done, the site has to be stabilized using construction

fabrics. This helps to separate the new base from mixing with the existing soil. The fabric layer will act as a primary layer to prevent from root

encroachment, burrowing insects and other garden pests. ït can enhance the life of the site and improve the stability. ït determines how much of weight

load can be carried.

3. Choosing a base material

Upon the fabric layers, base materials will be Illed on the site. The base material will depend on the soil type, local conditions and percolation. Some of the factors to consider while selecting a base material include, weather,

irrigation, electric and plumbing needs, gas and other landscaping solutions.

Moreover, the project cost has to be considered by the ArtiIcial Grass

ïnstallation service in Scottsdale AZ while selecting a base material.

4. Laying the base material

TheArtiIcial Grass ïnstallation service in Scottsdale AZdecides on the

base material. ït is spread and leveled throughout the site surface. ït is normally done using hand tools, keeping in mind the design blueprint. Around 3 inches of the base will be covered using well draining native soil, it can go up to 6 inches using other materials depending on the drainage, height and stability. This determines the appearance of the turf and how

much weight it can hold.

5. Compaction of base material The base material has to be compacted to make sure it does not shift place or sink as the time goes by. Using professional compaction tools can guarantee the appropriate amount of compaction to achieve the design. Water Illed landscape rollers can be used to small areas. Even wooden boards, hand tamper and mallets are used as compaction tools. Excess materials can be removed using a broom, hand brush or a pointed trowel.

6. Spreading the artiIcial grass

The artiIcial grass is unrolled like a carpet now. The blades will now lay Lat fulIlling the design plan. ay them in a preplanned manner, to prevent wastage. To Latten the synthetic turf power tools are used. ater it is

brushed against the artiIcial grass. The grass is now ready for inIlling.

7. Seaming techniques Seaming the pieces together can guarantee a natural look. Use seaming adhesive or tape to attach the pieces to give one full look. Once the seaming

is done, the edges are trimmed.

8. ïnIll material

Using the right inIll material can promise a professional look. The choice of

inIll depends on the length of the blade.

Once the process is complete, the artiIcial grass has to be trimmed to be of

equal size. The place needs to be cleaned and any loose Ibers have to be eliminated.

Contact Us

Professionally ïnstalled

Putting Greens

ArtiIcial Grass

Scottsdale, AZ

Get Turf! 480-827-7878

Call for a free quote

Scottsdale AZ

http://www.puttinggreensscottsdaleaz.com/ïnstallation-Process.html