Volume 1 History of IGS Giroud lecture Keynote lectures Waste ...

Jstein

Description

• cours magistral - matière potentielle : short history of the origins of the igs 3 j. p. giroud giroud
• cours magistral - matière potentielle : waste
• cours magistral

Volume 1 History of IGS Giroud lecture Keynote lectures Waste landfi lls Landfi ll GCL Liners on slopes Liner interface Sealing and drainage of barriers Geomembrane properties Volume 2 Hydraulic Drainage - testing and analysis Drainage - case studies Dewatering Filtration Dams Reservoirs, canals and tunnels Erosion Erosion control - slopes Erosion control - coastal

• g.p. karunaratne
• k. kumagai
• c.j.f.p. jones
• t. huntley
• 3 s.h.
• s.h.
• landfi
• geosynthetics
• r.
• j.

Sujets

• Cours magistral
• Pedrosa
• Sadlier
• Drainage
• Behavior
• Ehrlich
• Scotto
• Ishida

Informations

• Publié par: figas
• Nombre de lectures: 20
• Langue: English
• Poids de l'ouvrage: 1 Mo

Extrait

SeeBeyond ICAN Suite
Deployment Guide
Release 5.0.2
SeeBeyond Proprietary and ConfidentialThe information contained in this document is subject to change and is updated periodically to reflect changes to the applicable
software. Although every effort has been made to ensure the accuracy of this document, SeeBeyond Technology Corporation
(SeeBeyond) assumes no responsibility for any errors that may appear herein. The software described in this document is furnished
under a License Agreement and may be used or copied only in accordance with the terms of such License Agreement. Printing,
copying, or reproducing this document in any fashion is prohibited except in accordance with the License Agreement. The contents
of this document are designated as being confidential and proprietary; are considered to be trade secrets of SeeBeyond; and may be
used only in accordance with the License Agreement, as protected and enforceable by law. SeeBeyond assumes no responsibility for
the use or reliability of its software on platforms that are not supported by SeeBeyond.
SeeBeyond®, SeeBeyond Integrated Composite Application Network (ICAN) Suite™, SeeBeyond eIndex Global Identifier™,
SeeBeyond eVision Studio™, SeeBeyond eView Studio™, SeeBeyond eBAM Studio™, SeeBeyond ePortal Composer™, SeeBeyond
eGate Integrator™, SeeBeyond eWay Intelligent Adapters™, SeeBeyond eTL Integrator™, SeeBeyond eInsight Orchestrator™,
SeeBeyond eXchange Integrator™, and SeeBeyond eXpressway Integrator™, and the SeeBeyond logo are trademarks and service
marks of SeeBeyond Technology Corporation. All other brands or product names are trademarks of their respective companies.
© 2003 by SeeBeyond Technology Corporation. All Rights Reserved. This work is protected as an unpublished work under the
copyright laws.
This work is confidential and proprietary information of SeeBeyond and must be maintained in strict confidence.
Version 20031221192811.
SeeBeyond ICAN Suite
Deployment Guide 2 SeeBeyond Proprietary and ConfidentialContents
Contents
Chapter 1
Introduction 6
Overview 6
Contents of This Guide 7
Writing Conventions 7
Additional Conventions 8
Supporting Documents 8
Chapter 2
Introducing eGate 9
About eGate 9
System Versatility 9
Project Organization 9
eGate Architecture 10
Runtime Components 10
Enterprise Designer 10
Chapter 3
Analysis and Planning 12
Introduction: Analysis and Planning 12
Gathering Information 13
Research and Interviews 14
Surveys 14
Analyzing Your Requirements 14
System-specific Needs 15
Operation and Performance Needs 16
Personnel and Training Needs 17
Business Planning Needs 17
Planning Your Deployment 18
Setting Up Overall Objectives 19
Identifying and Scheduling Tasks 20
Beginning Deployment 20
SeeBeyond ICAN Suite
Deployment Guide 3 SeeBeyond Proprietary and ConfidentialContents
Deployment Documents 21
Determining When Objectives Are Met 24
Chapter 4
Determining System Requirements 27
Introduction: System Requirements 27
Initial Considerations 28
Estimating Requirements 28
Consideration Factors 28
General Guidelines 29
JMS Client and Integration Server Settings 32
Chapter 5
Designing and Developing the eGate Environment 34
An Overview of eGate Design 34
Distributed Architecture Considerations 36
Distributed Architecture in eGate: Overview 36
Basic Architecture 38
Project and Component Organization 39
Methodology Considerations 39
What is Topology? 39
Elements of Topology 39
Sample Topologies 40
Three Basic Steps 41
Identifying External Systems 41
Configuring eGate Components 41
Hardware and Network Connections 41
Chapter 6
Testing, Transition to Production, and Maintenance 42
Introduction: Transition to Production 42
Pre-Transition Testing 44
Testing Methodology 44
Test Plan 44
Type of Data To Use 45
Testing the Output 45
Responsibility for Testing 45
Unit Testing 45
Integration Testing 46
Partial Integration Testing 46
Complete System Testing 46
SeeBeyond ICAN Suite
Deployment Guide 4 SeeBeyond Proprietary and ConfidentialContents
Performance Testing 46
Acceptance Testing 47
Transition to Production 47
Post-Transition Maintenance 47
Implementing Changes 47
Transition to Production: Summary 48
Appendix A
Deploying eGate in a Windows Clustering Environment 49
Overview 49
Requirements 50
Configuring Support for Repository Failover 51
Using the Repository in a Windows Clustering Environment 59
Glossary 60
Index 68
SeeBeyond ICAN Suite
Deployment Guide 5 SeeBeyond Proprietary and ConfidentialChapter 1
Introduction
This chapter introduces you to this guide, its general purpose and scope, and its
organization. It also provides sources of related documentation and information.
In this chapter
! Overview on page 6
! Contents of This Guide on page 7
! Writing Conventions on page 7
! Supporting Documents on page 8
1.1 Overview
The Deployment Guide provides deployment planning guidelines and deployment
strategies for the SeeBeyond® Integrated Composite Application Networks™ (ICAN)
Suite. This guide is designed for management, system administrators, and others who
are tasked with deployment of SeeBeyond eGate Integrator™ (eGate™).
The purpose of this guide is to help you successfully complete the following stages of
deployment:
! Analyzing the project requirements
! Planning the deployment
! Determining system requirements
! Designing and developing the eGate environment
! Testing eGate
! Transition to production
! Maintaining the eGate environment
SeeBeyond ICAN Suite
Deployment Guide 6 SeeBeyond Proprietary and ConfidentialChapter 1 Section 1.2
Introduction Contents of This Guide
1.2 Contents of This Guide
This document includes the following information:
! Chapter 1, “Introduction” provides an overview of this document’s purpose,
contents, writing conventions, and supported documents.
! Chapter 2, “Introducing eGate” discusses the general features and architecture of
eGate.
! Chapter 3, “Analysis and Planning” explains how to analyze your current business
processes and information systems setup in order to plan your eGate deployment.
! Chapter 4, “Determining System Requirements” helps you gather relevant
information and make decisions to determine the type of hardware required to
support your eGate environment.
! Chapter 5, “Designing and Developing the eGate Environment” explains how to
design and develop and create an eGate environment to best meet your overall
business and information systems needs. It also contains valuable system
optimization information.
! Chapter 6, “Testing, Transition to Production, and Maintenance” tells you what to
do during the final phases of your eGate deployment, including pre-transition
testing, the transition to production, and post-transition maintenance.
! Appendix A, “Deploying eGate in a Windows Clustering Environment”
describes how to set up failover support for the Repository using Microsoft
Windows 2000 and Windows Server 2003 clustering technologies.
This guide also includes a Glossary on page 60. The glossary provides definitions of
eGate terms.
1.3 Writing Conventions
The following writing conventions are observed throughout this document.
Table 1 Writing Conventions
Text Convention Example
Button, file, icon, parameter, Bold text ! Click OK to save and close.
variable, method, menu, and ! From the File menu, select Exit.
object names. ! Select the logicalhost.exe file.
! Enter the timeout value.
! Use the getClassName()
method.
! Configure the Inbound File
eWay.
SeeBeyond ICAN Suite
Deployment Guide 7 SeeBeyond Proprietary and ConfidentialChapter 1 Section 1.4
Introduction Supporting Documents
Table 1 Writing Conventions (Continued)
Text Convention Example
Command line arguments Fixed font. Variables bootstrap -p password
and code samples are shown in bold
italic.
Hypertext links Blue text http://www.seebeyond.com
Additional Conventions
Windows Systems
For the purposes of this guide, references to “Windows” will apply to Microsoft
Windows Server 2003, Windows XP, and Windows 2000.
Path Name Separator
This guide uses the backslash (“\“) as the separator within path names. If you are
working on a UNIX system, please make the appropriate substitutions.
1.4 Supporting Documents
For more information about eGate, refer to the following documents:
! eGate Integrator User’s Guide
! eGate Integrator JMS Reference Guide
! eGate Tutorial
! SeeBeyond ICAN Suite Installation Guide
!N Suite Primer
SeeBeyond ICAN Suite
Deployment Guide 8 SeeBeyond Proprietary and ConfidentialChapter 2
Introducing eGate
This chapter gives a general overview of the eGate, including system descriptions,
general operation, and basic features.
In this chapter
! “About eGate” on page 9
! “eGate Architecture” on page 10
2.1 About eGate
The SeeBeyond eGate Integrator 5.0 system runs on a distributed and open architecture
that enables components to reside on different servers/workstations within a global
network. Depending on the communication protocols and ad