MKP Series AXIAL CAPACITORS PCB APPLICATIONS

-

Documents
5 pages
Obtenez un accès à la bibliothèque pour le consulter en ligne
En savoir plus

Description

Niveau: Secondaire, Lycée, Terminale
MKP Series AXIAL CAPACITORS PCB APPLICATIONS Technical data General characteristics C4C – C4H – C4G – C4M – Self-Healing – Low losses – High ripple current – High contact reliability – Suitable for high frequency applications D < 10 mm >10 mm ≥ 22mm > 22 mm d 0.8 mm 20 AW 1 mm 18 AWG 1.2 mm 16 AW General technical data VDE 0560 - IEC61071 - EN6107 Application class (DIN 40040) GPD / LS Temperature range (Case) -40 to + 85 °C Max permissible ambient temperature (operation at rated power, rated current and natural cooling) +70 °C Capacitance tolerance code (15th digit) J = ± 5%; K = ± 10% Peak non-repetitive max curren IPKR x 1. Test voltage terminal to terminal UTT 2 UN for 10 seconds Insulation resistance test conditions Temperature: +25 °C ± 5% Voltage charge time: 1 minute Test voltage: 100 DC Typical value (Ris x C): 3000 seconds Test voltage terminal to case UTC 3KV- 50Hz for 60 seconds Dissipation factor (tg?) ≤ 5 x 10-4 at 1 KHz and 20 °C Damp heat test - Test conditions Performances Temperature: +40 °C - Relative humidity: 93% ±2 Test duration: 56 days Capacitance change: ≤ ± 5% tg? change: ≤ 50% of nominal value at 1 KHz Insulation resistance: ≤ 50% of limit value IEC climatic category 40 / 85 / 56 according to IEC 68-1 Capacitance deviation in the operating temperature range

  • capacitance versus operating time

  • test voltage terminal

  • ød

  • high contact

  • repetitive max curren

  • dimensions max

  • capacitors switching

  • days capacitance


Sujets

Informations

Publié par
Nombre de visites sur la page 49
Signaler un problème

MKP Series AXIAL CAPACITORS PCB APPLICATIONS
±5 40 General characteristics C4CC4HC4GC4M SelfHealing Low losses High ripple current High contact reliability Suitable for high frequency applications ±5 40 D <10 mm>10 mm22 mm22mm > d 0.8mm 1mm 1.2mm 20 AW18 AWG16 AW
Technical data
General technical data Application class (DIN 40040) Temperature range (Case) Max permissible ambient temperature (operation at rated power, rated current and natural cooling) th Capacitance tolerance code (15digit) Peak nonrepetitive max curren Test voltage terminal to terminal UTT Insulation resistance test conditions
Test voltage terminal to case UTC Dissipation factor (tgδ) Damp heat test  Test conditions
Performances
IEC climatic category Capacitance deviation in the operating temperature range of40 to +85°C Change of capacitance versus operating time Protection Flame retardant (IEC 3841)
Lead Installation Life Expectancy Failure quota Vibration strength

      
L
L
VDE 0560  IEC61071  EN6107 GPD / LS 40 to + 85°C +70°C
±5 40
±5 40
ØD
J = ± 5%; K = ± 10% IPKRx 1. 2 UNfor 10 seconds Temperature: +25°C ± 5% Voltage charge time: 1 minute Test voltage: 100DC Typical value (Risx C): 3000 seconds 3KV 50Hz for 60 seconds 4 at 1 KHz and 205 x 10°C Temperature: +40°C  Relative humidity: 93% ±2 Test duration: 56 days Capacitance change:± 5% tgδchange:50% of nominal value at 1 KHz Insulation resistance:50% of limit value 40 / 85 / 56 according to IEC 681 ±1.5% max on capacitance value measured at +20°C
3% after 30.000 Hours at URMSor after 100.000 Hours at UN Polyester wrapping with epoxy resin fill th Standard execution: not flame retardant 4digit code th On request flame retardant execution category C,4digit code S Tinned copper (medium lead content 5%) Whatever Position 30.000 Hours at URMS;100.000 Hours at UN 9 300 / 10components hour DIN 40040,Table 6, Class V
     
