Niveau: Supérieur, Doctorat, Bac+8
Reliability Datasheet RD25 Introduction LUXEON® Power Light Sources represent a revolutionary advance over conventional small signal LED light sources. This application note summa rizes the reliability performance of the LUXEON family. The application note discusses general reliability concepts, potential failure modes, and aspects of product reliability that are affected by the customer application. While the reliability of LUXEON Power Light sources is very high, adherence to the device maximum ratings is required. The overall product reliability depends on the customer's drive conditions and adherence to recommended assembly practices. As with any other type of LED, extreme junction temperatures caused either by excessive power dissipation, an abnormally high thermal path, or improper assembly can cause thermal overstress fail ures. As with any LED, electrical transients can cause electrical overstress failures. These different failure modes are discussed in this application note. The reliability of the LUXEON light source is different from typical filament light sources. Filament light sources typically wear out after a certain operating time. For LUXEON light sources, assuming that the junction temperature and maximum drive current is within the product maximum ratings, the catastrophic failure rate of the LUXEON can be character ized as a constant, random failure rate as defined by the MTTF equation as described in more detail within this application note. In addition, similar to other LEDs, the LUXEON light source exhibits a gradual reduction in light output over time.
- high temperature
- operating life
- light source
- lumileds product
- luxeon reliability
- thermal shocks can
- cause catastrophic
- than standard