Philips Semiconductors Product specification

Philips Semiconductors

Description

Philips Semiconductors Product specification NE/SE5560Switched-mode power supply control circuit 11994 Aug 31 853-0125 13721 DESCRIPTION The NE/SE5560 is a control circuit for use in switched-mode power supplies. This single monolithic chip incorporates all the control and housekeeping (protection) functions required in switched-mode power supplies, including an internal temperature-compensated reference source, internal Zener references, sawtooth generator, pulse-width modulator, output stage and various protection circuits. FEATURES • Stabilized power supply • Temperature-compensated reference source • Sawtooth generator • Pulse-width modulator • Remote on/off switching • Current limiting • Low supply voltage protection • Loop fault protection • Demagnetization/overvoltage protection • Maximum duty cycle clamp • Feed-forward control • External synchronization PIN CONFIGURATION D, F, N Packages 1 2 3 4 5 6 7 8 9 10 11 12 13 14 16 15 VCC VZ FEEDBACK GAIN MODULATOR DUTY CYCLE CONTROL RT CT FEEDFORWARD OUTPUT (COLL) OUTPUT (EMIT) DEMAG: OVERVOLTAGE GND CURRENT LIMITING REMOTE ON/OFF EXTERNAL SYNC SL00360 Figure 1. Pin Configuration ORDERING INFORMATION DESCRIPTION TEMPERATURE RANGE ORDER CODE DWG _ 16-Pin Plastic Dual In-Line Package (DIP) 0 to 70°C NE5560N SOT38-4 16-Pin Plastic Small Outline Large (SOL) Package 0°C to 70°C NE5560D SOT162-1 16-Pin Plastic

• duty cycle


• ratings symbol


• gnd


• vz


• symbol parameter


• pin


• current

Sujets

• Current
• Package
• Semiconductor
• Référence
• Duty cycle

Informations

• Publié par: pefav
• Nombre de lectures: 28
• Langue: English

Extrait

Philips Semiconductors Switched-mode power supply control circuit

DESCRIPTION The NE/SE5560 is a control circuit for use in switched-mode power supplies. This single monolithic chip incorporates all the control and housekeeping (protection) functions required in switched-mode power supplies, including an internal temperature-compensated reference source, internal Zener references, sawtooth generator, pulse-width modulator, output stage and various protection circuits. FEATURES • Stabilized power supply • Temperature-compensated reference source • Sawtooth generator • Pulse-width modulator • Remote on/off switching • Current limiting • Low supply voltage protection • Loop fault protection • Demagnetization/overvoltage protection • Maximum duty cycle clamp • Feed-forward control • External synchronization

ORDERING INFORMATION DESCRIPTION 16-Pin Plastic Dual In-Line Package (DIP) 16-Pin Plastic Small Outline Large (SOL) Package 16-Pin Plastic Dual In-Line Package (DIP) 16-Pin Cerdip Dual In-Line Package (CERDIP) ABSOLUTE MAXIMUM RATINGS SYMBOL PARAMETER Supply 1 V CC Voltage-forced mode I CC Current-fed mode Output transistor (at 20-30V max) I OUT Output current Collector voltage (Pin 15) Max. emitter voltage (Pin 14) T A Operating ambient temperature range SE5560 NE5560 T STG Storage temperature range NOTES: 1. Does not include current for timing resistors or capacitors.

1994 Aug 31 1

Product specification NE/SE5560

PIN CONFIGURATION D, F, N Packages V CC 1 16  FEEDFORWARD V Z 2 15  OUTPUT (COLL) FEEDBACK 3  14  OUTPUT (EMIT) GAIN 4  13  DEMAG: OVERVOLTAGE MODULATOR 5  12  GND DUTY CYCLE CONTROL  6  11  CURRENT LIMITING R T 7 10  REMOTE ON/OFF C T 8 9  EXTERNAL SYNC SL00360 Figure 1. Pin Configuration

TEMPERATURE RANGE ORDER CODE DWG # 0 to 70 ° C NE5560N SOT38-4 0 ° C to 70 ° C NE5560D SOT162-1 -55 ° C to 125 ° C SE5560N SOT38-4 -55 ° C to 125 ° C SE5560F 0582B

RATING +18 30 40 V CC +1.4V +5 -55 to +125 0 to 70 -65 to +150

58-30

UNIT V mA mA V V ° C ° C ° C

21 531271