Renesas Starter Kit for SH7211 Tutorial Manual

Rev.1.00

Description

REG10J0126-0100 Renesas Starter Kit for SH7211 Tutorial Manual RENESAS SINGLE-CHIP MICROCOMPUTER Rev.1.00 Renesas Technology Europe Ltd.Revision date ：17.Jan.2008 www.renesas.com Table of Contents Chapter 1. Preface..................................................................................................................................................1 Chapter 2. Introduction.............2 Chapter 3. Tutorial Project Workspace ...................................................................................................................3 Chapter 4. Project Workspace.4 4.1. Introduction....................4 4.2. Creating a new Project Workspace ..............................................................................................................4 4.3. Build Configurations and Debug Sessions...................................................................................................5 4.3.1. Build Configuration.5 4.3.2. Debug Session.......................................................................................................................................5 Chapter 5. Building the Tutorial Project ..................................................................................................................6 5.1. Building Code................6 5.2. Connecting the debugger ........................................................................... ...

Informations

• Publié par: Sonab
• Nombre de lectures: 118
• Langue: English

Extrait

 

REG10J0126-0100                                                                   Rev.1.00 Revision date ： 17.Jan.2008     

Renesas Starter Kit for SH7211 Tutorial Manual

 

RENESAS SINGLE-CHIP MICROCOMPUTER  

Renesas Technology Europe Ltd. www.renesas.com

 

Table of Contents Chapter 1. Preface .................................................................................................................................................. 1   Chapter 2. Introduction............................................................................................................................................2   Chapter 3. Tutorial Project Workspace ................................................................................................................... 3   Chapter 4. Project Workspace................................................................................................................................4   4.1. Introduction...................................................................................................................................................4   4.2. Creating a new Project Workspace .............................................................................................................. 4   4.3. Build Configurations and Debug Sessions ................................................................................................... 5   4.3.1. Build Configuration................................................................................................................................5   4.3.2. Debug Session.......................................................................................................................................5   Chapter 5. Building the Tutorial Project .................................................................................................................. 6   5.1. Building Code...............................................................................................................................................6   5.2. Connecting the debugger ............................................................................................................................. 7   Chapter 6. Downloading and Running the Tutorial ................................................................................................. 8   Chapter 7. Project Files.........................................................................................................................................12   7.1. Standard Project Files................................................................................................................................12   7.1.1. Initialisation code (Resetprg.c) ............................................................................................................ 12   7.1.2. Board initialisation code (Hwsetup.c / hwsetup.h) ............................................................................... 13   7.1.3. Main tutorial code (Main.c / main.h)..................................................................................................... 13   Chapter 8. Additional Information..........................................................................................................................14  

 

ii

  Chapter 1. Preface Cautions This document may be, wholly or partially, subject to change without notice. All rights reserved. No one is permitted to reproduce or duplicate, in any form, a part or this entire tdtoecn ument wit permission of Renesas Technology Europe Limited. Trademarks  All brand or product names used in this manual are tr ardeegimstaerrkesd  otrrademarks of their respective companies o organisations.  Copyright © Renesas Technology Europe Ltd. 2008. All rights reserved. © Renesas Technology Coropno.r a2t0i08. All rights reserved.  © Renesas Solutions Corporation. 2008. All rights reserved. Website: http://www.renesas.com/ Glossary ADC Analog to Digital Converter RSK Renesas Starter Kit HEW High performance Embedded Workshop CPU Central Processing Unit E10A ‘E10A for Starter Kit’ debugger LED Light Emitting Diode LCD Liquid Crystal Display USB Universal Serial Bus     1

  Chapter 2. Introduction This manual is designed to answer, in tutorial for mc,o tmhme omn oqstuestions asked about using a Renesas Starter hKei t (RSK): T tutorials help explain the following: • How do I compile, link, download, and run a simple program on the RSK?   •   How do I build an embedded application? •   How do I use Renesas’ tools? The project generator will crteuattoer i a  l project with two selectable build configurations  •   ‘Debug’ is a project built with the debugger support included. •   ‘Release’ build demonstrating code suitable for release in a product. Files referred to in this manual are installed using gtehnee rpartoojre cats  you work through the tutorials. The tpulteosr iianl   tehxisa m manual assume that installation procedures described in the RSK Quick Start Guide have been completedk.   SPltearats e refer t Guide for details of preparing the configuration.   NOTE: These tutorials are designed to show you eh RoSw Kt oa nuds ea rteh not intended as a comprehensive introducti the High performance Embedded  W(HorEkWs)h odpebugger or the compilaeirn st o–o lcplhease consult the relevant user  manuals for more in-depth information.     2

   

les.  s ntthwita smetecruoif et nis eh

Maintaining only one set of project files means that projects are more controllable.

tnnesto  focmmno C files are consulc noit niR eheael bselduiCo. iudlehb ifugc nos anrati fdef d  #i  dellortfed htiwet sesin tinp  u oita .snfnocrugibue d il ochthf f or maexelcdude   may be  in files xe  beD eht nihti woriton mugeb dt eh nfosuoinilcthe ows  allThis ceanmb Edeedod  ni hgiHrep-mrofnfiguration menu no . hT eubli docthh uc staer catoc eb otderugifnthe ows ect projpo( krhsa llEH)W

 

Chapter 3. Tutorial Project Workspace

  3

 Dheugebboo  tthmmoct noedoc si  rations.   configu esb iudla dnt aeui bwo tor fesilf eht fo lla sedial utorhe ts. Titnougarnoifdlc   dedhtiw tuo ehtd geenthow doanl eRelsa’es tiauit debug monito a  ‘ engised ohs ot dut the Tisl iaortiet erwbegu,nd w cowhoan bde c heTrow apski eculcn