Installinga LiveCycle ES2 Server Tutorial
Description
bbc
Installing a LiveCycle ES2 Server Using
Turnkey Tutorial
® ®Adobe LiveCycle ES2
February 2010 Version 9 © 2010 Adobe Systems Incorporated. All rights reserved.
Adobe® LiveCycle® ES2 (9.0) Installing a LiveCycle ES2 Server Using Turnkey Tutorial
Edition 1.0, February 2010
This user document is licensed for use under the terms of the Creative Commons Attribution Non-Commercial 3.0 License. This License allows users to copy, distribute, and transmit the
user guide for noncommercial purposes only so long as (1) proper attribution to Adobe is given as the owner of the user guide; and (2) any reuse or distribution of the user guide contains a
notice that use of the user guide is governed by these terms. The best way to provide notice is to include the following link. To view a copy of this license, visit
http://creativecommons.org/licenses/by-nc-sa/3.0/.
Adobe, Adobe logo, Acrobat, Flash, LiveCycle, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. JavaS-
cript is a trademark or registered trademark of Sun Microsystems, Inc. in the United States and other countries. Microsoft and Windows are either trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners.
Adobe Systems Incorporated, 345 Park Avenue, San Jose, California 95110, USA. 3
Contents
1. Introduction
Audience . . . . ...
Installing a LiveCycle ES2 Server Using
Turnkey Tutorial
® ®Adobe LiveCycle ES2
February 2010 Version 9 © 2010 Adobe Systems Incorporated. All rights reserved.
Adobe® LiveCycle® ES2 (9.0) Installing a LiveCycle ES2 Server Using Turnkey Tutorial
Edition 1.0, February 2010
This user document is licensed for use under the terms of the Creative Commons Attribution Non-Commercial 3.0 License. This License allows users to copy, distribute, and transmit the
user guide for noncommercial purposes only so long as (1) proper attribution to Adobe is given as the owner of the user guide; and (2) any reuse or distribution of the user guide contains a
notice that use of the user guide is governed by these terms. The best way to provide notice is to include the following link. To view a copy of this license, visit
http://creativecommons.org/licenses/by-nc-sa/3.0/.
Adobe, Adobe logo, Acrobat, Flash, LiveCycle, and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. JavaS-
cript is a trademark or registered trademark of Sun Microsystems, Inc. in the United States and other countries. Microsoft and Windows are either trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners.
Adobe Systems Incorporated, 345 Park Avenue, San Jose, California 95110, USA. 3
Contents
1. Introduction
Audience . . . . ...
Sujets
Informations
| Publié par | Awle |
| Nombre de lectures | 254 |
| Langue | English |
| Poids de l'ouvrage | 1 Mo |
Extrait
bb c
Installing a LiveCycle Turnkey Tutorial
February 2010
ES2 Server Using
Adobe ® LiveCycle ® ES2 Version 9
2010 Adobe Systems Incorporated. All rights reserved. © Adobe® LiveCycle® ES2 (9.0) Installing a LiveCycle ES2 Server Using Turnkey Tutorial Edition 1.0, February 2010 This user document is licensed for use under the terms of the Creative Commons Attribution Non-Commercial 3.0 License. This Lic ense allows users to copy, distribute, and transmit the user guide for noncommercial purposes only so long as (1) proper attribution to Adobe is given as the owner of the user guide; and (2) any reuse or distribution of the user guide contains a notice that use of the user guide is governed by these terms. The best way to provide notice is to include the following link. To view a copy of this license, visit http://creativecommons.org/licenses/by-nc-sa/3.0/ . Adobe, Adobe logo, Acrobat, Flash, LiveCycle, and Reader are either registered trademarks or trademarks of Adobe Systems Incorp orated in the United States and/or other countries. JavaS-cript is a trademark or registered trademark of Sun Microsystems, Inc. in the United States and other countries. Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective ow ners. Adobe Systems Incorporated, 345 Park Avenue, San Jose, California 95110, USA.
Contents
3
1. Introduction Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Additional requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Configuration for 64-bit Windows Server 2008 or Vista installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Preconfiguration for PDF Generator ES2 or PDF Generator 3D ES2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Configuring native application file support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing Acrobat for PDF Generator ES2 or PDF Generator 3D ES2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2. Installing and Configuring - Express Mode Installing LiveCycle ES2 using Express Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Prepare to install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Install LiveCycle ES2 using Express Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Install service packs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Configuring LiveCycle ES2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Configure LiveCycle ES2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3. Post-Deployment Restarting the JBoss services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Accessing the LiveCycle ES2 web applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Change default password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Activate the LiveCycle ES2 deployment license . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Access web applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Configuring PDF Generator ES2 or PDF Generator 3D ES2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Setting environment variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Setting the Adobe PDF Printer as the default printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Uninstalling LiveCycle ES2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
1. Introduction
4
This tutorial walks you through the end-to-end process of installing and configuring Adobe LiveCycle ES2 (Enterprise Suite) using the turnkey method in Express mode. The turnkey method automatically installs all of the required files for LiveCycle ES2, RedHat JB oss 4.2.1, and MySQL 5.0. It then launches LiveCycle Configuration Manager and guides you through a few basic configurations before finali zing and deploying LiveCycle ES2 to the new application server. In this tutorial, you will run the installer, configure and deploy the EAR files using LiveCycle Configuration Manager, configu re a Reader Extensions ES2 Rights credential, and test your LiveCycle ES2 installation using a web browser. Note: The content provided assumes you are running Windows Server 2008 (64-bit). Necessary settings for a 64-bit installation are inc luded here. If you are running another verion of Windows, review Installing and Deploying LiveCycle ES2 Using Turnkey for any additional configu-rations your specific version may require. This tutorial will not cover installing and deploying the following LiveCycle ES2 modules: • LiveCycle Business Activity Monitoring ES2 • LiveCycle Connector for EMC Documentum • LiveCycle Connector for IBM FileNet • LiveCycle Connector for IBM Content Manager • LiveCycle Content Services ES2
Audience This tutorial is intended for users who are installing, configuring, administering, or deploying LiveCycle ES2. These users incl ude evalu-ators, administrators, or developers who are responsible for inst alling, configuring, administering, or deploying LiveCycle ES2. The infor-mation provided is based on the assumption that anyone reading this document is familiar with the Microsoft® Windows® operating systems and web environments.
System requirements This tutorial assumes that: • You are installing and deploying LiveCycle ES2 on a Windows Server 2008 (64-bit) system. • Your computer has the following minimum requirements: • Disk space for installation: 3 GB (an additional 3 GB is required if you are using an ESD download and not installing from a DV D) • System temporary space during installation: 5.4 GB • Memory for running LiveCycle ES2: 3.4 GB • Processor: Intel® Pentium® 4 or equivalent, 1.6 GHz, or higher processor • You already have LiveCycle ES2 on DVD or as a downloaded archive file. • You have administrator privileges on Windows. If you run the installer using an account that does not have these privileges, yo u will be prompted for the credentials of an account with administrator privileges. • Your web browser is Microsoft Internet Explorer 7 or later.
Check the web for updated documentation
Introduction
ADOBE LIVECYCLE ES2 5 Installing a LiveCycle ES2 Server Using Turnkey Tutorial
Additional requirements This section outlines additional preperatory tasks required if you are installing on a 64-bit Windows environment, or if you ar e including PDF Generator ES2 or PDF Generator 3D ES2 as part of your installation.
Configuration for 64-bit Windows Se rver 2008 or Vista installations On 64-bit Windows Server 2008 or Vista operating systems, modi fy the Admin Approval Mode security option as follows: 1 Go to Start > Control Panel > Administrative Tools > Local Security Policy > Local Policies > Security Options . 2 Locate User Account Control: Behavior of the elevation prompt for administrators in Admin Approval Mode and set it to Elevate without prompt . 3 Restart your computer. Caution: The Windows User Account Control (UAC) must remain disabled for PDF Generator ES2 or PDF Generator 3D ES2 to work properly. You can run the installation and configuration process by turning on the UAC with the Elevate without prompt option enabled. However, you must disable UAC to run PDF Generator ES2 or PDF Generator 3D ES2. If you are installing and configuring on an evaluation system, you can enable the UAC on the computer after you have deployed t o your production computer or uninstalled PDF Generator ES2 or PDF Generator 3D ES2.
Disable the Windows UAC on Vista: 1 To access the System Configuration Utility, go to Start > Run and in the Open: box enter MSCONFIG . 2 Click the Tools tab and scroll down and select Disable UAC . 3 Click Launch to run the command in a new window. 4 When finished, close the command window and close the System Configuration window. 5 Restart your computer. To enable the UAC again, repeat the steps above and select Enable UAC before clicking Launch.
Disable the Windows UAC on Server 2008: 1 Go to Start > Control Panel > User Accounts > Turn User Account Control on or off . 2 Deselect the Use User Account Control (UAC) to help protect your computer option and then click OK . 3 Restart the computer. To enable the UAC again, repeat the steps above and select the Use User Account Control (UAC) to help protect your computer opt ion before restarting the computer.
Preconfiguration for PDF Generator ES2 or PDF Generator 3D ES2 If you want to install PDF Generator ES2 or PDF Generator 3D ES2, complete the tasks in the following sections. With native applicat ion file support, PDF Generator ES2 and PDF Generator 3D ES2 can convert files from native formats such as Microsoft Word to Adobe PDF format. Note: If you want to run the LiveCycle PDF Generator ES2 Tutorial after your LiveCycle ES2 installation is done, you can install Microsoft Office 2007 in preparation.
Configuring native application file support For native application file support, you must have one of the following products installed: • Microsoft Office 2003, 2007 (DOC, XLS, PPT, RTF, TXT, Microsoft Office open XML Formats) Check the web for updated documentation
Introduction
ADOBE LIVECYCLE ES2 6 Installing a LiveCycle ES2 Server Using Turnkey Tutorial
• Microsoft Office Visio 2003, 2007 (VSD) • Microsoft Publisher 2003, 2007 (PUB) • Microsoft Project 2003, 2007 (MPP) Caution: The password for the Microsoft Office user must not contain two consecutive $ characters (for example, dollar$$). • AutoCAD 2005, 2006, 2007, 2008 (DWG, DXF, DWF) Note: Native file conversions using AutoCAD for DWG, DXF, and DWF files are supported only on 32-bit environments. Conversions for these file types using Acrobat are supported on both 32 and 64-bit platforms. • Corel WordPerfect 12, X4 (WPD) • Adobe Photoshop® CS2 • Adobe FrameMaker® 7.2, 8.0 (FM) • Adobe PageMaker® 7.0 (PMD, PM6, P65, PM) • OpenOffice 2.4.2, 3.1 (ODT, ODP, ODS, ODG, ODF, SXW, SXI, SXC, SXD, SXM). Note: OpenOffice 3.1 or later must be installed on the server to convert the documents created in version 3.1. OpenOffice 2.4.2 canno t convert documents created in later versions of OpenOffice. You do not need to install a native software application to convert the following native file formats: • Print files (PS, PRN, EPS) • Web files (HTML) • Image files (JPEG, GIF, BMP, TIFF, PNG) Installing Acrobat for PDF Generator ES2 or PDF Generator 3D ES2 A DVD that contains Acrobat 9.2 Professional Extended is supplied with the LiveCycle ES2 media or as an option for ESD downloads . Install Acrobat 9.2 Professional Extended: 1 Uninstall any other version of Acrobat by using the Add/Remove Programs window in the Windows Control Panel. 2 Restart your computer if prompted. 3 Install Acrobat 9.2 Professional Extended by running the AutoPlay .exe file from the installation media or folder which contains the installer file set. 4 Follow the instructions on the Acrobat installer screens.
Check the web for updated documentation
2. Installing and Configuring - Express Mode
7
This tutorial walks you through the end-to-end process of installing and configuring Adobe LiveCycle ES2 (Enterprise Suite) using the turnkey method in Express mode. This tutorial assumes that you are running Windows Server 2008 (64-bit) on a computer configure d with the minimum requirements outlined in “System requirements” on page 4 . If you are running on a different operating system, refer to the Installing and Deploying LiveCycle ES2 Using Turnkey document. This tutorial also assumes that you are accepting all default values except where indicated in the instructions. The default in stallation directory is C:\Adobe\Adobe LiveCycle ES2\ .
Installing LiveCycle ES2 using Express Mode
Prepare to install 1 Check the installation media: DVD: Ensure that the installation media that you received is not damaged. If you copy the installer media contents to the hard disk of your computer where you are installing LiveCycle ES2, ensure that you copy the entire DVD contents on to the local hard disk. Ru nning the installer from a shared network drive is much slower than running it locally. ESD downloaded files: If you downloaded the installer from the Adobe web site (the LiveCycle ES2 Electronic Software Download or ESD file), verify the integrity of the installer file using the MD5 checksum. Use a tool such as WinMD5 to calculate and compar e the MD5 checksum of the downloaded file with the checksum published on the Adobe download web page. Note: To avoid installation errors, do not copy the install files to a directory path that exceeds the Windows maximum path length li mit. Typically, long network paths cause this error. 2 (ESD only) Extract the entire JBoss_DVD.zip archive file to your computer. Note: Be sure to keep the directory hierarchy unchanged from the original ESD file. 3 Disable any on-access virus scanning software for the duration of the installation. This greatly improves the installation spee d.
Install LiveCycle ES2 using Express Mode 1 Do one of the following: • From the JBoss DVD, navigate to the \livecycle_server\ directory and double-click the run_windows_installer.bat file. This script determines the correct LiveCycle ES2 installer to run. • After extracting the JBoss_DVD.zip file, navigate to the \livecycle_server\ directory and double-click the _ _ staller.bat file. This scrip termines the correct LiveCycle ES run windows in t de 2 installer to run. 2 When prompted, select the language for installation, and then click OK . 3 On the Introduction screen, click Next . 4 Accept the default directory as listed and then click Next . 5 In the Choose Installation Type screen, select Turnkey as the installation type and click Next. 6 On the Turnkey Installation Options screen, leave Include BAM with LiveCycle deselected and click Next .
Check the web for updated documentation
Installing and Configuring - Expr ess Mode
ADOBE LIVECYCLE ES2 8 Installing a LiveCycle ES2 Server Using Turnkey Tutorial
7 On the MySQL Database Setup screen, enter the password that will be used by the MySQL root administrator and, optionally, type your MySQL port number. Note: MySQL does not allow special characters or spaces in the user name or password. Ensure that you record this password for future reference. • To verify that the port number is available for use, click Test . If the port is available, the installer displays a green check mark. If the port is in use, the installer displays a red X. • If the port is in use, type a new port number and repeat the process until you find a port that is available. Clicking Reset populates the port box with the default port number 3306.
8 On the following screens, read the license agreements for LiveCycle ES2 Server, MySQL, and JBoss Application Server. If you agre e, select I accept and then click Next on each screen. 9 Click Next , review the preinstallation summary, and then click Install . The installation program displays the progress of the installation. This process takes several minutes to complete. 10 Review the Release Notes and click Next . 11 Review the post-installation summary information and ensure that Start LiveCycle Configuration Manager is selected, and then click Done . Note: You can run LiveCycle Configuration Manager by using the ConfigurationManager.bat file located in the C:\Adobe\Adobe LiveCycle ES2\configurationManager\bin directory.
Install service packs If you are planning to use this installation for development or in-depth evaluation, you can install any required service pack updates after completing this tutorial. Updates are available from LiveCycle Technical Support .
Configuring LiveCycle ES2 Express Mode completes the configuration by using default values and limited configuration screens. Press F1 in LiveCycle Configuration Manager to view the Help content for the screen you are viewing.
Configure LiveCycle ES2 1 If you are continuing from the LiveCycle ES2 installation, proceed to step 2; otherwise, navigate to C:\Adobe\Adobe LiveCycle ES2 \ configurationManager\bin and run the ConfigurationManager.bat script. 2 On the LiveCycle Configuration Manager Welcome screen, click Next . 3 On the Upgrade Task Selection screen, ensure that none of the available options are selected and click Next . Check the web for updated documentation
Installing and Configuring - Expr ess Mode
ADOBE LIVECYCLE ES2 9 Installing a LiveCycle ES2 Server Using Turnkey Tutorial
4 On the Turnkey Mode screen, select Express Mode and proceed to the next section. 5 Select the required modules, and click Next . Note: For this tutorial, do not select Business Activity Monitoring ES2, Content Services ES2, or any of the ECM connector modules.
6 On the Configure Turnkey SSL screen, add the information to configure the SSL certificate. Enter values for your organization in the blank boxes. The LiveCycle ES2 Turnkey automatically configures the correct SSL values for your LiveCycle ES2 server (such as the Common Name, Certificate Alias and Keystore filename).
7 ( LiveCycle Forms ES2, Output ES2 and PDF Generator ES2 only ) On the LiveCycle ES2 IVS EARs Inclusion Confirmation screen, you can install three service specific sample applications. For example, Forms IVS is a sample application that allows you to verif y that LiveCycle ES2 is properly deployed and running. Click Include IVS EARs in deployment set to install these sample files. Note: Do not deploy the IVS EAR files in a production environment.
Check the web for updated documentation
Installing and Configuring - Expr ess Mode
ADOBE LIVECYCLE ES2 10 Installing a LiveCycle ES2 Server Using Turnkey Tutorial
8 On the Express Mode screen, click Start to start the configuration process. During this process, LiveCycle Configuration Manager packages and deploys the LiveCycle ES2 EAR files to the JBoss server, and initializes the MySQL database. LiveCycle Configuratio n Manager also starts the JBoss and MySQL services. This process will take several minutes. At any time during this process, you can click View Progress Log to see a real-time log of the activities.
9 When the deployment and express mode configuration are complete, click Next . 10 (PDF Generator ES2 only) In the Administrator user credentials for LiveCycle server machine screen, enter the user name and password of a user with administrative privileges on the server computer. Click Add User . You must add at least one administrative user for Windows Server 2008.
11 (PDF Generator ES2 only) In the LiveCycle PDFGenerator System Readiness Test dialog box, click Start to validate if the system has been appropriately configured for PDF Generator ES2.
Check the web for updated documentation
Installing and Configuring - Expr ess Mode
Review the System Readiness Tool Report. The report will return information such as whether you have the correct versions of required software installed, or if you have configured the environment variables for native application support. Any issues reported will not affect configuration and can be addressed after you have finished configuring LiveCycle ES2. 12 Click Next .
ADOBE LIVECYCLE ES2 11 Installing a LiveCycle ES2 Server Using Turnkey Tutorial
13 (Reader Extensions ES2 only) In the LiveCycle Reader Extensions ES2 Credential Configuration dialog box, choose one of these options: • If you have received a Reader Extensions ES2 Rights credential file (.pfx or .p12), browse to its location, type the credential p assword as provided by Adobe, type the name for the configured credential that will be displayed in the Reader Extensions ES2 application , click Configure , and then click Next . • If you do not have credential file, select Configure Later Using LiveCycle Administration Console and click Next to skip this step. You can configure the Rights credential from LiveCycle Administration Console ( Settings > Trust Store Management > Local Credentials ). 14 On the LiveCycle ES2 Samples Import screen, choose one of these options: • Click Import to import the LiveCycle ES2 Samples and then click Next . • To skip this step, select Skip LiveCycle ES2 Samples Import and click Next . You can import the samples later by restarting LiveCycle Configuration Manager and choosing to import the samples. Caution: Do not import the LiveCycle ES2 Samples if you are deploying LiveCycle ES2 to a production system. Importing the samples creates users with default passwords, which may be a security concern for your production environment.
15 Review the LiveCycle Configuration Manager Summary list and click Next . Check the web for updated documentation
© 2010-2024 YouScribe