La lecture à portée de main
Découvre YouScribe en t'inscrivant gratuitement
Je m'inscrisDécouvre YouScribe en t'inscrivant gratuitement
Je m'inscrisDescription
Informations
Publié par | eberhard_karls_universitat_tubingen |
Publié le | 01 janvier 2008 |
Nombre de lectures | 24 |
Poids de l'ouvrage | 7 Mo |
Extrait
Spectroscopic and electrical studies of
the influence of electrodes on SnO 2
based sensors
Spektroskopische und elektrische
Untersuchungen zum Einfluss der
Elektroden bei Zinndioxid basierten
Sensoren
DISSERTATION
Angefertigt im Rahmen einer gemeinsam betreuten
Doktorarbeit zur Erlangung des Grades eines Doktors der
Naturwissenschaften
Fakultät für Chemie und Pharmazie
der Eberhard Karls Universität Tübingen
und
Ecole Nationale Supérieure des Mines
Saint-Etienne
2008
vorgelegt von
JOHAN BERTRAND Dekan: Professor Dr. L. Wesemann
1. Berichterstatter: Privatdozent Dr. U. Weimar
2. Berichterstatter: Professor Dr. Ch. Pijolat
Tag und Ort der Verteidigung: 27.06.2008, St. Etienne, France
Members:
Dr. Udo Weimar IPC/University of Tuebingen
Prof. Michel Labeau LMGP/ INP Grenoble Minatec
Thierry Pagnier LEPMI / ENSEEG, Grenoble
Rewiewer:
Prof. Thomas Chassé Condensed Matter/University of Tuebingen
Dr. Odile Merdrignac-Conanec Verre et Céramique/Université de
Rennes1
Supervisor:
Dr. Nicolae Barsan IPC/University of Tuebingen
Prof. Christophe Pijolat MICC/ école des mines de st Étienne
Dr. Jean-Paul Viricelle MICC/ école des mines de st Étienne
2 Liste der Akademischen Lehrer
Meine akademischen Lehrer waren:
Bigot *jean-Pierre,Bilal *Essaïd,Bonnefoy Olivier,Bouchardon Jean-Luc, Cournil
Michel , Favergeon Loic ,Garcia Daniel, Grosseau Philippe, Gruy Frédéric, Guy
Bernard, Guyonnet René, Herri Jean-Michel, Lalauze René, Lowys Jean-Pierre,
Moutte Jacques, Périer-Camby Laurent ,Pijolat Christophe,Pijolat Michèle,
Soustelle Michel, Thomas Gérard,Viricelle Jean-Paul.
3 Introduction
Human beings need a regular supply of food and water and essentially continuous
3
supply of air. The requirements for air and water are relatively constant (10–20 m and 1–2
litres per day, respectively). That all people should have free access to air and water of
acceptable quality should be a fundamental human right. The atmosphere we live in contains
numerous chemicals, natural and artificial, some of which are vital to life while many others
are more or less harmful. Recognizing our need for clean air, in 1987 the WHO Regional
Office [1] for Europe published Air quality guidelines for Europe (1), containing health risk
assessments for 28 chemical air contaminants.
Various chemicals are emitted into the air from both natural and man-made
(anthropogenic) sources. The quantities may range from hundreds to millions of tonnes
annually. Natural air pollution stems from various biotic and abiotic sources such as plants,
radiological decomposition, forest fires, volcanoes and other sources such as geothermal, as
well as emissions from land and water. These result in a natural background concentration
that varies according to local sources or specific weather conditions. Anthropogenic air
pollution has existed since people learned to use fire, at least. However, it has increased
rapidly since the beginning of industrialization. The augmentation of air pollution resulting
from the ever expanding use of fossil fuels, growth in the manufacture sector and widespread
use of chemicals has been accompanied by mounting public awareness of its detrimental
effects on health and the environment. Moreover, basic research on the nature, quantity,
physicochemical behaviour and effects of air pollutants has greatly increased our knowledge
in recent years. Nevertheless, there is a great deal more that needs to be understood. Several
aspects concerning air pollutants effects on public health require further assessment; these
include newer scientific areas such as reproductive or developmental toxicity. The proposed
guidelines will undoubtedly be changed as future studies lead to new information.
The task of reducing levels of exposure to air pollutants is complex . It begins with an
analysis to determine which chemicals are present in the air, where, at what levels, and
whether the likely levels of exposure are hazardous to humans and the environment. Then, it
must be decided whether an unacceptable risk is present. When a hazard is identified,
mitigation strategies should be developed and implemented so as to prevent excessive risk to
public health in the most efficient and cost-effective way.
4 Introduction
Analyses of air pollution problems are exceedingly complicated but are an important
issue for the 21st century.
There is a great variety of techniques to monitor the atmosphere pollutants: absorption
spectrometry either in infrared or ultraviolet range, or chemical methods (flame spectroscopy,
chemiluminescence and gas chromatography). Table 1-1 illustrates the variety of target
compounds as well as the large number of analytical methods used for their measurement. All
these techniques, often very precise, require a sampling. Besides the problems of homogeneity
and accurate representation of samples, there are long, often costly techniques of analysis to
be implemented, and which can be difficult or even impossible to use for continuous
applications. One example that comes to mind is as part of detector of ambient pollution or for
industrial site.
Gas Concentration (ppm) range Common analysis method
Air Rejections
-3 SO 10 - 10 10 - 2000 Flame spectroscopy 2
UV Fluorescence
IR Absorption
UV Absorption
potentiostatic electrolysis
-3
NOx 10 - 10 1 - 2000 Chemical Luminescence
IR Absorption
potentiostatic electrolysis
4 5Table 1-1 :Main CO 300 - 1000 10 - 2*10 IR Absorption 2
pollutant gas , Ion selective electrode (ISE)
Thermal conductivity Concentration range
And common analysis -3O 10 - 1 _ Chemical Luminescence 3
method [ 2 ] UV Absorption
4
NH _ 100 - 10 iso-phénolique method 3
(local) ISE (NH ) 3
Gas Chromatography
2- H S _ 1 - 1000 ISE (S ) 2
(local) methylene Blue Dosage
Therefore new gas sensors, able of discriminating, but also to measure these different
pollutants in real-time are required.
Several gas sensors have been developed so far. Some, such as electrolyte solution
based electrochemical or catalytic combustion sensors, were developed a long time ago for
professionals. There are many different sensors based, in general, on a simple law of physics.
Figure 1 -1 summarizes a selection of gas sensors commonly used at present.
5 Introduction
Figure 1 -1 : An illustrated selection of gas sensor types
The era of sensors started in the 1970s during which semiconductor combustible gas,
solid electrolyte oxygen and humidity sensors were commercialized for non-professional uses.
Metal oxides sensors (MOX sensors) in general and SnO , in particular, have attracted 2
the attention of many users and scientists interested in gas sensing in changeable atmospheric
conditions. This interest has been generated due to their low cost fabrication, simplicity of use
and finally the large number of detectable gases possible.
With the advent of pollution and performance concerns in the automotive industries,
intelligent homes & appliances market (Figure 1-2) and in general any industry working with
gas these devices have come into demand.
Figure 1-2 : application of sensor in the home automation (domotics) field
6 Introduction
The principle of how the SnO based-sensor works is quite simple and based on the 2
change of electrical resistance when exposed to a certain gas or gasses. SnO is the best 2
understood oxide-based gas sensors. Nevertheless, there are highly specific and sensitive
SnO sensors not yet available or feasible. In real working conditions, SnO sensors are 2 2
confronted with the problem of high cross-sensitivity for other gasses, which strongly limits
their application.
In order to be used in practice, a gas sensor should fulfil many requirements which
depend on the purposes, locations and conditions of their operation. Among the sensor’s
prerequisites, first would be their effectiveness: sensitivity, selectivity and response time.
Second level criterions would be: reliability: drift, stability.
Efficiency [3] and reliability are interconnected with each element [4-5] of the sensor -
sensitive layers, substrates, heaters and electrodes. These function together in device so the
sensor should be studied as a whole. The verification and optimization of each parameter have
key roles to play in the research and development of gas sensors
The Laboratory M.I.C.C. (Microsystemes Intrusmentation et Capteurs Chimiques)
managed by C. Pijolat located in St Etienne is interested in the development of gas sensor for
industrial applications. Few years ago, they considered the fact that the electrodes which
collect the output signal can have an influence on the overall performance of gas sensors. In
fact, changing the nature of the electrode metal can greatly modify the results. They tried to
explain this behaviour inside a physical-chemical model [6] (c