Mode d

Mode d'emploi POTENTIELL


56 pages
Le téléchargement nécessite un accès à la bibliothèque YouScribe
Tout savoir sur nos offres


Découvrez le mode d'emploi pour savoir monter et faire fonctionner sa hotte aspirante POTENTIELL



Publié par
Nombre de lectures 77
Langue Français
Poids de l'ouvrage 1 Mo
Signaler un problème
Contents Safety information Product description Control panel Cleaning and maintenance
4 Whatto do if ... 7 Technicaldata 7 Environmentalconcerns 8 IKEAGUARANTEE
10 11 12 13
Safety Information BeforeÞrst useregulations. Do not repair or replace any Your safety and that of others is paramount.part of the appliance unless speciÞcally Remove cardboard protection pieces,stated in the user manual. protectiveÞappliance must be disconnectedlm and adhesive labels from The accessories. fromthe power supply before carrying Check the appliance for any transportout any installation work. damage. Earthing of the appliance is compulsory. To avoid any damage do not place any(required only for class I). weights on the appliance. Do not expose Thepower cable must be long enough the appliance to atmospheric agents.for connecting the appliance, once This manual and the appliance itself provideÞtted in its housing, to the power supply important safety warnings, to be read andsocket. observed at all times. Donot pull the power supply cable in This is the attention symbol, pertainingorder to unplug the appliance. to safety, which alerts users to potential Theelectrical components must not be risks to themselves and others.accessible to the user after installation. All safety warnings are preceded by the Donot touch the appliance with any wet attention symbol and the following terms:part of the body and do not operate it DANGER:when barefoot.indicates a hazardous situation which, if not avoided, will Theappliance is not intended for use cause serious persons (including children) with any WARNING:physical, sensory or mental impairment,Indicates a hazardous situation which, if not avoided, couldor without experience and knowledge cause serious injury.of the appliance, unless supervised or All safety warnings give speciÞpreviously instructed in its use by thosec details of the potential danger/warning presentresponsible for their safety. and indicate how to reduce risk of injury, Donot repair or replace any part of the damage and electric shock resulting fromappliance unless speciÞcally indicated improper use of the appliance. Carefullyin the manual. All other maintenance observe the following must be carried out by a specialised technician. Precautions and general  Childrenmust be supervised to ensure recommendations they do not play with the appliance.  Theelectrical installation and the  Whendrilling through the wall pay electrical connection must be carried attention not to damage electric out by a qualiÞed technician according connections and/or pipes. to the manufacturer’s instructions and  Airvents must always discharge to the in compliance with the local safety outside.
 Themanufacturer rejects all responsibilities for any damage caused by improper use or wrong settings.  Appropriatemaintenance and cleaning ensure the good working order and the best performance of the appliance. Regularly clean all stubborn surface dirt to avoid grease build up. Remove and clean or change theÞlter regularly.  Neverßame cook food (ßambé) under the appliance. Using freeßames might causeÞre.  Failureto observe the instructions for cleaning the hood and replacing the Þlters may result in aÞre.  Exhaustair must not be vented through aßue used for removal of fumes produced by gas combustion appliances or other combustible materials, but must have a separate outlet. All national regulations governing extraction of fumes must be observed.  Thereshall be adequate ventilation if the hood is being used at the same time as other appliances using gas or other combustible materials. The negative pressure of the room must not exceed 4 Pa (4x 10-5 bars). For this reason ensure that the room is well ventilated.  Donot leave frying pans unattended when frying, as the frying oil may catch Þre.  Beforetouching the light bulbs, ensure that they are cold.  Donot use or leave the hood without the light bulb correctlyÞtted, as this may cause electric shock.  Thehood is not a work surface, therefore do not place any objects on top of it or overload it.  Duringall installation and maintenance operations wear appropriate working gloves.  Thisappliance is not suitable for outdoor use.
WARNING:when the hob is in use, accessible parts of the hood may become hot.
Installation and connection After unpacking the appliance, check for any transport damage. In the event of problems, contact the After-sales Service. To prevent any damage, only remove the appliance from its polystyrene foam packaging at the time of installation.
Preparing for installation WARNING:this is a heavy product; the hood should only be lifted and installed by two or more people. The minimum distance between the hob and the bottom part of the hood must not be less than 40 cm for burning gas or other fuels and 40 cm for electric cookers. Before installation also check the minimum distances stated in the manual of the cooker. If the installation instructions for the cooker specify a greater distance between cooker and hood, this distance must be observed.
Electrical connection Make sure the power voltage speciÞed on the appliance rating plate is the same as the mains voltage. This information can be found on the inside of the hood, under the greaseÞlter. Power cable replacement (type H05 VV-F) must be carried out by a qualiÞed electrician. Contact an authorized service centre. If the hood isÞtted with an electric plug, connect the plug to a socket complying with current regulations, located in an accessible place. If no plug isÞtted (direct wiring to the mains), or if the socket is not located in an accessible place, a qualiÞed electrician should install a standardised double pole power switch that will enable complete isolation from the mains in case of category III overvoltage conditions, in accordance with wiring rules.
Use The hood has been designed to be installed and used either as a “Exhausted model”, or as a “Recirculation model”.
Exhausted model (see symbolin installation booklet) Cooking steam is sucked and channelled outside the house through a discharge duct (not supplied),Þtted to the hood steam outlet. Ensure that the discharge duct is correctly Þtted to the air outlet, unit using an appropriate connection system. Important:If already installed, remove the charcoalÞlter/s.
Recirculation model (see symbolin installation booklet) The air isÞltered through one or more the charcoalÞlters, and then resent into room. Important:Ensure appropriate air circulation around the hood. Important:If the hood is supplied without charcoalÞlters, these must beÞtted before the hood can be used. Filters are available in shops. The hood should be installed away from particularly dirty areas, windows, doors and heat sources. The accessories for wallÞxing are not included because walls made of different materials require different types ofÞxing accessories. UseÞxing systems suitable for the walls of your home and the weight of the appliance. For more details, contact a specialized dealer. Keep this booklet for future consultation.
Product description
1 2 3
Control panel T1  Light ON/OFF. T2  Speed decrease.  Press“T2” button to decrease the speed from 4 (intensive) to 1.  Press“T2” button during operation at speed 1, the hood sets to OFF. T3  Speed increase.  PressT3 button and the hood sets from T2 OFF to speed 1.  Pressthe button (hood ON) to increase the speed of the motor from 1 to 4 (intensive).  Therespective LED goes on for each speed. L1  Speed1 LED L2  Speed2 LED L3  Speed3 LED L4  Speed4 LED
Temperature Alarm The hood is equipped with a temperature sensor which activates the motor at speed 3 in case the temperature in the display zone is too high (LED L3ßashing).
1  Control Panel. 2  Light. 3  Grease Filter.
L1 L2 L3 L4
This condition remains as such until the temperature falls below the alarm
This mode can be quit by pressing key T2 (Speed 2), or T3 (Speed 4).
Cleaning and maintenance
WARNING: - Never use steam cleaning equipment. - Disconnect the appliance from the power supply. IMPORTANT:do not use corrosive or abrasive detergents. If any of these products accidentally comes into contact with the appliance, clean immediately with a damp cloth.  Cleanthe surfaces with a damp cloth. If it is very dirty, add a few drops of washing up detergent to the water. Finish off with a dry cloth. IMPORTANT:do not use abrasive sponges or metallic scrapers or scourers. Over time, these can ruin the surface.  Usedetergents speciÞcally designed for cleaning the appliance and follow the manufacturer instructions. IMPORTANT:clean theÞlters at least monthly to remove any oil or grease residuals. To clean the greaseÞlter The metal greaseÞlter has an unlimited life and must be washed once a month by hand or dishwasher at low temperature and with a short cycle. With cleaning in a dishwasher the greaseÞlter may become dull; this does not effect itsÞltering capacity.
GreaseÞlter maintenance: 1. Disconnectthe hood from the electric power supply. 2 Removethe greaseÞlters: pull the release handle outwards, then remove theÞlter. 3. Aftercleaning the greaseÞlter, remount in reverse order.
CharcoalÞlter maintenance(if the hood is installed in recirculation mode) 1. Unplugthe appliance or disconnect the power supply. 2. Removethe greaseÞlter 3. Turnthe metal frame to release the charcoalÞlter. 4. Replacewith a new one andÞx it in with metal frame. ReÞt the greaseÞlter in place. Unlike traditional charcoalÞlters, this charcoalÞlter can be washed and reactivated. With normal hood use, theÞlter should be cleaned once a month. The best way to clean theÞlter is in a dishwasher at the highest temperature possible, using a normal dishwasher detergent. To avoid particles of food or dirt settling on the Þlter during washing and giving rise to unpleasant smells, it is advisable to wash theÞ lter on its own. After washing, dry the Þlter in the oven at 100°C for 10 minutes to reactivate it.TheÞlter will retain its odour-absorbing capacity for three years, after which it will have to be replaced.
Lamp maintenance Disconnect the hood from the electricity. Warning Prior to touching the light bulbs ensure they are cooled down. 1. Removelamp coverÞxing screw. 2. Rotateto release lamp cover. 3. Useonly max 12V-10W-G4 halogen bulb. 4. ReÞt lamp cover andÞx it withÞxing screw IMPORTANT:make sure you don’t touch the lamp with your bare hands.
What to do if ... Problem Possiblecause Solution The appliance does not workThere is no mainsCheck for the presence of electrical powermains electrical power. Turn off the appliance and restart it to see if the faults persists. The appliance is notCheck if the appliance is connected to theconnected to the electrical electrical supplysupply. Turn off the appliance and restart it to see if the faults persists. The hood’s suction level is notThe suction speed is tooCheck the suction speed and enough lowadjust as necessary. The metalÞlters areCheck that theÞlters are clean dirty Ifnot, clean theÞlters in the dishwasher. The air vents areCheck the air vents for any obstructed obstructionsand remove as necessary. The light does not workThe light bulb is brokenCheck the light bulb and replace it if necessary. The light bulb is notCheck that the light bulb has correctlyÞcorrectlytted beenÞtted. If not,Þt the light bulb in right way.
Before contacting the After-sales service: Switch the appliance on again to see if the problem has disappeared. If not, switch it off again and repeat the operation after an hour. If your appliance still does not work properly after carrying out the checks listed in the troubleshooting guide and switching the appliance on again, contact the After-sales service, clearly explaining the problem and specifying:
the type of fault; the model; the type and serial number of the appliance (given on the rating plate);  the Service number (the number after the word SERVICE on the rating plate inside the appliance).
Technical data
Dimensions - Internal (mm)Width 600 Height 600 Depth 327 3 Airßow max - Exhaust (m /h)660 Noise max - Exhaust (dBa)68,30 3 Airß611ow max - Recirculating (m /h) Noise max - Recirculating (dBa)74 Total Power (W)345 Lamps 9x 10W Installation minimun height dimensions (cm)gas or combi 40 cookers electric cookers40
The technical information is situated in the rating plate on the internal side of the appliance.