The Advance Guide On Rod Blanks and a Rod Designer's Fishing Memoirs

Daniel Chee

Description

I first joined the fishing tackle industry as a fishing rod engineer for Shimano, this was later followed by the role of Product Manager for the fishing division. I have since moved on in my career; but as all fishermen know, you can never quite be really that far from what's true to your heart; hence my writing of this book.

In short, the book introduces the various fishing categories, walks you through the process of how a blank is made, explains blank terminology and quality as well as teaches you how to maximize the performance of your rod. Also thrown in are some of my personal fishing memoirs which I hope would be a good read for you when you are not out on the water.

Sujets

• Sport
• Autour du sport
• Histoire du sport
• Autres sports
• Sports aquatiques
• Sports de plein air
• Recreation
• Fishing
• Sports

Informations

• Publié par: eBookIt.com
• Date de parution: 17 mai 2016
• Nombre de lectures: 0
• EAN13: 9789810793029
• Langue: English

Extrait

THE ADVANCE GUIDE ON ROD BLANKS & A ROD DESIGNER’S FISHING MEMOIRS
by Daniel E.L. Chee
Published By Daniel E.L. Chee
ISBN 978-981-07-9302-9
Copyright © Daniel E.L. Chee
All Rights Reserved. No part of this publication may be reproduced or copied in any form or by any means - graphic, electronic or mechanical, including photocopying, recording, taping or information retrieval systems—without written permission of the Author.
Conditions of Sale: this book is sold subject to the condition that it shall not, by way of trade or otherwise, be lent, resold, hired out or otherwise circulated without the publisher’s prior consent in any form of binding or cover other than that in which it is published and without a similar condition including this condition being imposed on the subsequent purchaser.
While every reasonable care is taken to ensure the accuracy of information printed, no responsibility can be accepted for any loss or inconvenience caused by any error or omission.
Contents
Preface
Introduction
Chapter 1: Introduction to the various fishing categories
Chapter 2: The blank workshop
Chapter 3: Understanding blank terminology & quality
Chapter 4: Maximizing the performance of your rod
Chapter 5: Fishing memoirs: How I started fishing
Chapter 6: Fishing memoirs: Kelongs (Fish traps of the sea)
Chapter 7: Fishing memoirs: Prawn fishing
Chapter 8: Fishing memoirs: Pulau Babi Besar (Big Boar Island)
Chapter 9: Fishing memoirs: Lake Kenyir
Chapter 10: Fishing memoirs: Thailand BSL
Chapter 11: Fishing memoirs: Mandurah
Chapter 12: Fishing memoirs: Black Bream of the Swan
Chapter 13: Fishing Memoirs: Fremantle bottom bashing and MahiMahi
Chapter 14: Fishing memoirs: Fremantle jigging
Chapter 15: Fishing memoirs: Exmouth
Chapter 16: Fishing Memoirs: Rompin Sailfish
Chapter 17: Fishing memoirs: Tolaga Bay, New Zealand
Chapter 18: Fishing memoirs: Galatama
Chapter 19: Fishing memoirs: Port Stephens, New South Wales, Australia
Chapter 20: Fishing memoirs: Rolex/IGFA Labuan Intl. Gamefishing Tournament
Chapter 21: Fishing memoirs: Other odd snippets
Afterword
Preface
I have been living and breathing all things piscatorial since the earliest of my memories. Fishing to me is not just a sport; rather, it is of a beautiful and breathtaking journey. It is a journey that is spiritual and one that spans across generations. It is a journey my father first led me onto and one that I will introduce my two little boys to when they come of age. Fishing has also brought me to many amazing places, made me lifelong friends and changed my perspective of life. Instilled in me now is the great respect and appreciation for nature. In short, it runs through my blood and is part of who I am.
It is with this fervent passion that I first jumped into a career in the fishing tackle industry. I distinctly remember the time when I was a fresh out of university and was working for a hospitality supplies company. I was doing exceptionally well in the job and was even offered an opportunity to open and manage a store for myself…and that was when I was offered an opportunity in the role of a R&D Engineer of fishing rods in Shimano. I immediately tendered my resignation much to the chagrin of the boss, but he had to grudgingly accept my decision after I told him that I had to follow my heart!
I have been fishing since I was six and I started building fishing rods when I was around twelve, so when I joined Shimano as a rod engineer, you can imagine it was really akin to being in a giant playground and given access rights to all the technological bells and whistles! Of course it was not all just play; the first six months of every engineers training was actually spent on the production floor monotonously studying the various processes and actually working as part of the production force itself. We cut the pre-pregs, rolled the blanks and did the machining work ourselves; and as such, at the end of the training, all the engineers were expected to be able to fully build a rod completely from scratch. As I had joined the company with much prior background knowledge on rod building, I completed the training in less than two months and then got fast tracked to study under my design “Sinsehs”.
I was fortunate enough to be trained under three different Japanese “Sinsehs” that were experts in the various categories of Japanese fishing styles as well as in the rod development for these specific styles. As there was an unwritten rule that the names and pictures of all rod designers should be kept strictly confidential, I shall refer to and express my gratitude to them only via their initials.
T.T.-San was an expert in the category of Fune or boat fishing. He exuded a certain charismatic style and certainly looked more like a Japanese movie star than a designer. He was exceptionally detailed in his work beyond belief and had an immense knowledge of his sport. He was able to anticipate problems in a rod even before it was prototyped out.
Next was M.A.-San. M.A.-San was always quiet but the occasions he did open up, he spoke most passionately about ISO rock fishing. He was an expert in this field and was always willing to share the know-how of ISO rods, which typically consisted of high performance and extremely technical telescopic rods that covered an extensive range of rock fishing from bream to the muscle packed demonic looking Ishidai.(Knife-Jaw)
Lastly and most memorably, was K.M.-San who was my main mentor. KM-San was the most entertaining “Sinseh” I ever had. He was quirkily funny and never failed to bring a smile to our faces. He was the expert in Saltwater, Keiryu and Bass rods. Despite his easy going and unassuming nature, he had an immense knowledge of his craft and was like a walking material database. On more than several occasions, he surprised me by being able to recommend different materials with their corresponding modulus and density without referring to any notes…. he just had “it” at the back of his head.
These three “Sinsehs” were instrumental in guiding me through my days as a rod designer. I was given various projects to develop rods mainly for the Japanese domestic market as well as a small number of rods requested for by our European and South East Asian counterparts. I was also rotated through the development of the different categories of fishing rods to ensure that I had gained an all-round knowledge and skillset which would see me in good stead later in my piscatorial career. During this stint and once I had gained the necessary expertise, I was also given the privilege to mentor the next generation of junior designers who have also performed admirably in their current roles.
Three years later, an opportunity knocked when the Singapore office wanted to develop more rods for the South East Asian market. As I had been fishing in the region for the greater part of my life, I was tasked with the role of a Product Manager for South East Asia. It was here whereby I planned and developed a portfolio of rods that ranged from Surf to Game and Jigging to Popping. These were radically cutting edge and were very well received not just in S.E.Asia but in later parts, in the international markets as well.
So in short, this is a brief story of a part of my life that I would like to share in the book. But for now, probably the most important point from this preface is for me to offer my sincerest gratitude to all of whom I had mentioned above as well as those who I had inadvertently left out but met, worked with and befriended in this great piscatorial adventure. I would also like to dedicate this book to my dad who “Showed me the way”, my mum who supported the two crazy fishermen in the family, my always encouraging wife and my lovely albeit mischievous kids Seth & Tristan.
I have since moved on in my career to another line; but as all fishermen know, and as already evident from me penning this book, you can never quite be really that far from what’s true to your heart.
“So what is this book about you might ask?” Frankly I can’t say for sure myself. It is part an informative guide and part my fishing memoirs with some bitter sweet misadventures thrown in for good measure. This book is to some extent inspired by Hemingway’s dedicated life of fishing and fuelled by a more than healthy dose of mid-life crisis on my part. It is a book that I hope to also be able to someday publish a hardcopy for my kids to help them understand and see their “Papa” in another light; not just the milk bottle toting, diaper changing Papa that they would otherwise likely remember me by.
That being said, it’s my first attempt at writing a book and I do sincerely hope you would enjoy the read as much as I had the pleasure in penning it.
Introduction
F or clarity and ease of referencing, I have structured this book into 5 key areas.
Chapter 1 : Introduction To The Various Fishing Categories of Japan
This chapter takes us briefly through different fishing categories that are prevalent in Japan for both fresh and saltwater fishing. It also details the tackle requirements for each category and more specifically, talks about the type of rods that are needed and why they were designed as such.
Chapters 2 : The Blank Workshop
The following chapter would focus on the subject of the actual rod blank making. This would begin with an introduction on the various types of raw materials and progress through to the completion of the rod blank itself.
Chapter 3 : Understanding Blank Terminology & Quality
In understanding blank terminology & quality, I would run through the various common blank terminologies and also detail specifically on the quality of both the blank as well as that of the completed rod. This would help you to understand your rods features and limitations better. For those wishing to purchase a new blank or rod, this chapter should also be able to assist you in making a more educated purchase decis